Programmable Function Keys - NEC 910i Installation And User Manual

i-Series System
To activate Personal Greeting for your phone:
1. TALK + *4.
OR
1. TALK + FUNCTION KEY (Call Forward to Device).
2. Press 7 + When you hear, "Please start recording," record your Personal Greeting.
If you already have Personal Greeting or Park and Page set up, you can dial:
7 to re-record
5 to listen (then # to listen again)
3 to erase (then optionally HOLD to cancel the erase)
3. Press # + Personal Greeting condition:
2 = Busy or not answered
4 = Immediate
6 = Not answered
3 = Cancel
4. Dial the destination to receive your calls. The destination can be:
●
A co-worker's extension.
●
Your Voice Mailbox (by dialing the Voice Mail master number).
●
Off-premise via Common Abbreviated Dialing (by entering
#2 + bin).
●
Greeting without forwarding so caller hears busy (by entering
your extension number).
You cannot forward to a Department Group pilot number.
5. Dial Personal Greeting type:
2 = All calls
3 = Outside calls only
4 = Intercom calls only
6. TALK to hang up.
To cancel your Personal Greeting:
1. TALK + *47 + 3.
2. TALK to hang up when you are done.

Programmable Function Keys

Customize your phone by storing features or outside lines under your Programmable Function Keys. For example, instead of
dialing *0 to return a Message Waiting, just press your Message Waiting function key instead.
To program a function key:
1. TALK + 851 + FUNCTION KEY you want to program.
2. Select key code from chart below.
Programmable Function Keys
2-33