Off-Hook Call Announce - Fujitsu CT-10 User Manual

OFF-HOOK CALL ANNOUNCE
This feature lets you receive an intercom voice call on the speaker of a
busy CT-30 telephone. Your telephone must be equipped with the
additional port. See your Communication Manager for details.
The Off-Hook Call Announce feature works when the called extension is
engaged in any of the following situations:
o Conversation using the handset or headset.
o Data call using the analog modem port.
o Call Forward All Calls display.
e Message Waiting.
e Wake-Up/time reminder.
o Post-Selection state using a handset.
This feature does not work when the speaker is already in use.
To respond to an Off-l-look Call Announcement:
l
Talk in the direction of the built-in microphone.
To make an Off--Hook Call Announcement when the destination
party is using the handset:
1. Lift the handset.
- Listen for dial tone.
2. Press the ICM group button.
3. Dial the destination ICM group extension number.
- Listen for ringback tone.
4. Press the call announce button.
- You can now talk to the called extension. (The
called patfy will
receive your call through the speakerphone.)
NOTE
To answer an Off-Hook Call Announcement by the handset, hang up and
lift the handset to engage in a normal voice call. This feature does not
work if the called extension registers Off-Hook signaling mode. In this
case, cancel the Off-Hook signaling mode by dialing 570 after receiving
internal dial tone in order to use the Off-Hook Call Announce feature.
88