Fujitsu CT-10 User Manual page 114

To cancel an account code:
1. Press the account code button.
- The account code lamp lights steadily
2. Press the account code button again before any account coUe
digits have been entered.
- The account code /amp goes dark.
NOTES
1. If the account code entered is more than fifteen digits, only the first
fifteen digits are stored.
2. You can modify the account code by repeating the above steps
before disconnecting from the call.
3. If more than one account code is entered during a call, SMDR is
output for each account code.
To enter an account code while you are engaged in a conversation
if you do not have a programmable button:
1. Press FLASH.
2. Dial 5 6.
3. Dial the desired account code (up to fifteen digits).
4. Press FLASH.
- Listen for success tone.
- You are now reconnected.
NOTE
1 Canceling this feature manually will interrupt the conversation.
1
To cancel an account code:
1. Press FLASH.
2. Dial 5 6.
3. Press FLASH again before any account code digits have been
entered.
104