Fujitsu F9600 User Manual page 180

Feature Button Assignment
Via Program Mode (Cont'd)
Action
5. Press the program mode
button.
NOTES
1. A two-digit function code or feature button is required to enter the
Program mode.
2. If the extension is left available in the Program mode for more
than 30 seconds, the mode automatically cancels and you return
to normal operation.
3. A time-out affects the entire Program mode, not just feature
programming. The only codes the system saves if a time-out
occurs are those which have been entered and accepted. This
means that the ACCEPTED message should display before the
programmed button's lamp goes off.
4. Extension numbers cannot be programmed or changed by the
extension user.
5. A feature button cannot be changed while the assigned feature is
in use; for example, Call Forwarding.
6. Features cannot be assigned more than once on Digital
Telephone buttons with the exception of autodial buttons.
7. Programming of the programmable buttons may only be finished
when your telephone is not in use. A feature is available to use
10-20 seconds after programming is finished.
8. Pressing the HOLD button while in the Program mode displays
function codes.
9. To erase a feature from a button without assigning a new one,
press the NEW CALL button instead of dialing a new feature
code.
Results
You save your feature
assignments and exit Program
mode. The program mode
and mode change lamps
go off.
170