Rear (Emp-6100) - Epson EMP-6100 User Manual

Part Names and Functions

Rear (EMP-6100)

A L K J
B C
Name
A
Storage feet When storing the projector upright, make sure
that these feet are at the bottom.
B
Security slot (j) p.26
s
C
S-Video port
For S-video
Video port
For composite video
sources.
Audio port These connect to the audio out port of
L-Audio-R port
equipment that is connected to the S-Video or
Video port. s Quick Start Guide,
D
Rear foot
E
Power inlet Connects to the power cable. s Quick Start
Guide
I H G F
D E
Function
signals from video sources.
g
signals from video
g
p.31
Name
F
LAN port When a LAN cable is connected, you can
monitor and control the projector over a LAN.
p.66
s
G
RS-232C port When controlling the projector from a
computer, connect it to the computer with an
RS-232C cable. This port is for control use and
should not normally be used. s
H
Remote receiver Receives signals from the remote control.
s Quick Start Guide
I
Computer2 port For video signals from a computer and
component video
sources.
Audio port Connect to the audio out port of the computer
connected to the Computer2 port. s Quick
Start Guide
J
Computer1 port For video signals from a computer and
component video
sources.
Audio port Connect to the audio out port of the computer
connected to the Computer1 port. s Quick
Start Guide
K
Monitor Out port Outputs the computer image signal connected
to the Computer1 port to an external monitor.
This is not available for component video
signals or other signals being input to any port
other than Computer1 port. s
L
Audio Out port Outputs the sound of the image currently being
projected to external speakers.
6
Function
p.70
g signals from other video
g signals from other video
g
p.65