Resetting The Lamp Operating Time - Epson EMP-6100 User Manual

Replacing Consumables
E
Install the new lamp.
Insert the new lamp so that the lamp fits in place correctly and,
once it is fully inserted, tighten the two screws.
F
Replace the lamp cover.
Attention
• Make sure you install the lamp securely. If the lamp cover is
removed, the lamp turns off automatically as a safety precaution.
If the lamp or the lamp cover is not installed correctly, the lamp
does not turn on.
• This product includes a lamp component that contains mercury
(Hg). Please consult your local regulations regarding disposal or
recycling. Do not dispose of it with normal household waste.

Resetting the lamp operating time

f
The projector records how long the lamp is turned on and a message and
indicator notify you when it is time to replace the lamp. After replacing
the lamp, make sure you reset the lamp hours from the configuration
menu. s p.39
Only reset the lamp operating time after the lamp has been
q
replaced, otherwise the lamp replacement period is not
indicated correctly.
59