Download Print this page

Sanyo TEL-2095 User Manual page 7

Caller id phone

Advertisement

7. HOUR FORMAT SELECTING
Press the
DIAL
button to enter this setting when the LCD shows
HOUR FORMAT
and then the current value will display.
s
t
Use the
or
button to select the hour format (12 HOUR/24
HOUR). Press the
DIAL
button to confirm and exit.
8. DATE FORMAT SELECTING
Press the
DIAL
button to enter this setting when the LCD shows
DATE FORMAT
and then the current value will display.
s
t
Use the
or
button to select the date format (DD-MM/MM-DD).
Press the
DIAL
button to confirm and exit.
In the DD-MM mode, the time display sequence is day-month and
in the MM-DD mode, the sequence is month-day.
11
FUNCTION BUTTONS
1. Ringer Volume Selection
Set the ringer volume switch to the desired position (HI/LO/OFF). To
have the maximum ringer volume, move the ringer volume switch to
the
HI
position. To have a low ringer volume, move the ringer volume
switch to the
LO
position. If you would prefer the ringer not to disturb
you, move the ringer volume switch to the
2. Receiver and Speaker Volume Adjustment
There are 4 levels for selection. When your phone is in use mode, you
can press the
or
button to adjust the receiver and speaker
volume, and the corresponding level will show on the LCD.
3. Redial Function
Lift the handset or press the
redial the last dialled number.
4. Speaker Function
To switch your call to speaker phone, press the
the handset in the cradle. To switch back, simply lift the handset and
speak as normal. In the speaker state, you can make or answer a call.
5. Flash Button
Press the
R
button to terminate a call and institute a dialling tone for
another call or to get another call from "Call Waiting" (a special
telephone service).
NOTE: If you do not have any special telephone service, such as Call
Waiting, pressing
R
button during a call may disconnect your current
conversation.
In the on-hook state, press and hold the
SETTING
, (Refer to "
FUNCTION OPERATIONS
for details).
OFF
position.
button, then press the
RD/P
button to
button and replace
R
button to enter the
", section"
TIME SETTING
4
TIME
"

Advertisement

loading