Table Of Contents - Sanyo TEL-2095 User Manual

l Using the call back feature NOTE:
not available, it can not be called back.)
A. Call back the outgoing number: The unit can store up to 10
outgoing numbers.
1. In the on-hook state, press the
number will show on the LCD, then use
number that you want to dial out.
2. Pick up the handset or press the
be dialled out automatically.
B. Call back the incoming number: The unit can store minimum 76
incoming numbers.
1. Lift the handset or press the
2. Select the caller that you want to call back by pressing
button.
3. Press the DIAL button to automatically dial the phone number.
Or
s
In the on-hook state, use the or
to call back, then pick up the handset or press the
phone number can be dialled out automatically.
( If the number is blocked or is
DIAL button once, the last dialled
s t
the or button to select the
button, the phone number can
button to get a dial tone.
s
the
t
button to select the call you want
button, the
15
FEATURE LIST
SAFETY INSTRUCTIONS
INTRODUCTION
FUNCTION BUTTONS
FUNCTION OPERATIONS
RECEIVING CALL RECORDS
t
or
REVIEWING DISPLAY MESSAGES
MESSAGE WAITING
TOTAL & NEW CALLS
PRIVATE
REPEAT CALLS
END OF LIST
OUT OF AREA
BATTERY LOW INDICATOR
CALLER ID SYSTEM OPERATIONS
TROUBLESHOOTING

TABLE OF CONTENTS

.......................................................
...........................................
....................................................
.............................................
.........................................
......................................
...............................
..............................
............................................... 16
1
2
3
4
7
12
12
14