Operation Status Display; Front Panel Display - Sanyo DVR-HT120 Instruction Manual

Inserting batteries
Install two "R6 (HP 7)" batteries.
NOTE:
- Remove the batteries if the remote control is not to be used for a month
or more. Batteries left in the unit may leak and cause damage.

Operation Status Display

Front panel display

These symbols can light up on your DVD recorder display:
1
w
2
s
3 VPS/PDC
4 REM
5
6 NICAM
7 REC
8
D
9 dts
10 P
11 DVD+RW
12 ANGLE
13 PBC
14 T
15 TR
16 C
17 ST
18 CH
19 HQ, SP, LP, EP, EP+
20
1 2 9 3
VPS PDC
8
REC D
7
10 DVD RW
ANGLE PBC
12 13 11 14
Playback in progress.
Playback/record interrupted (Pause).
Video Programming System / Programme Delivery Control: A VPS or PDC code will be transmitted for the selected
TV program.
Displays the Title/Track time remaining
A recording (timer) has been programmed.
The DVD recorder has detected a Nicam audio signal.
Recording in progress.
Lights when playing a disc recorded with Dolby Digital Audio.
Lights when playing a disc recorded with DTS.
Lights when progressive video is being output.
Displays the type of DVD disc in the recorder: DVD /DVD+R / DVD+RW.
Displays the angle information of the DVD video disc.
Play Back Control.
Displays the current title number (DVD).
Displays the track selected/played (CD).
Displays the chapter selected/played (DVD).
During playback a HiFi/2 channel tone was detected or a HiFi/2 channel tone was received.
Channel/programme number.
Displays the recording quality selected during recording. Recording qualities HQ, SP, LP, EP or EP+ are shown
on the recorder display.
Multi-function display.
Remote control range
4 5 6 20
REM NICAM
15 16
Remote sensor
Within approx.
30° 30°
6 meters
TIMER CLEAR
RETURN SELECT
TRIM TEST SOUND
FUNCTION LEVEL SURROUND
TV VOL MUTE
CH/INPUT
SYSTEM DISC
MENU MENU
17 19
HQ
SP
LP
EP
EP
18
6