Table of Contents
Advertisement
Quick Links
INSTRUCTION MANUAL
DVD & Hi-Fi VCR Home Theater
Only cassettes marked
SANYO'S HELP-LINE
Call the toll-free number below if you have any difficulties operating this product.
1-800-813-3435 (Weekdays: 7:30 AM - 4:00 PM Central Time)
Before operating the unit, please read this manual thoroughly.
1AD6P1P1813--
DWM-3000, Issue Number 1
can be used with this video cassette recorder.
DWM-3000
English
Advertisement
Table of Contents
Related Manuals for Sanyo DWM-3000
Summary of Contents for Sanyo DWM-3000
- Page 1 SANYO'S HELP-LINE Call the toll-free number below if you have any difficulties operating this product. 1-800-813-3435 (Weekdays: 7:30 AM - 4:00 PM Central Time) Before operating the unit, please read this manual thoroughly. 1AD6P1P1813-- DWM-3000, Issue Number 1 English...
-
Page 2: Safety Precautions
SAFETY PRECAUTIONS CAUTION: The apparatus should not be exposed to water (dripping or splashing)and no objects filled with liquids, such as vases, should WARNING be placed on the apparatus. RISK OF ELECTRIC SHOCK FCC WARNING: This equipment may generate or use radio frequency DO NOT OPEN energy. -
Page 3: Important Safety Instructions
IMPORTANT SAFETY INSTRUCTIONS CAUTION: PLEASE READ AND OBSERVE ALL WARNINGS AND INSTRUCTIONS IN THIS OWNER’S MANUAL AND THOSE MARKED ON THE UNIT. RETAIN THIS BOOKLET FOR FUTURE REFERENCE. This set has been designed and manufactured to assure personal safety. Improper use can result in electric shock or fire hazard. The safeguards incorporated in this unit will protect you if you observe the following procedures for installation, use, and servicing. - Page 4 15. Power Lines 23. Disc Tray An outside antenna system should not be located in the Keep your fingers well clear of the disc tray as it is closing. vicinity of overhead power lines or other electric light or It can cause personal injury. power circuits, or where it can fall into such power lines or circuits.
-
Page 5: Table Of Contents
CONTENTS SAFETY PRECAUTIONS ............. E1 Selecting a DVD Menu ..........E41 IMPORTANT SAFETY INSTRUCTIONS ....... E2 Selecting a Title Menu [DVD] ......... E41 CONTENTS ................E4 Title Search [DVD] ............E42 ACCESSORIES ..............E5 Chapter Search [DVD] ........... E42 PRECAUTIONS ..............E5 Time Search [DVD] ............ -
Page 6: Accessories
Do not use strong solvents such as alcohol, Note: benzine, or thinner, as these might damage the surface If the unit still does not operate correctly, please contact your of the unit. nearest Sanyo Authorized Service Facility. -E5-... -
Page 7: Controls
CONTROLS Front Panel PRESET VOLUME CHANNEL EJECT VCR/DVD AM/FM OPEN/CLOSE VIDEO IN L-AUDIO IN-R STOP PLAY MINI 15 14 1. Power button (z/ON) 7. d/c (PRESET +/–) buttons 13. FL display 2. Cassette Loading Slot 8. Disc tray 14. Remote sensor (IR) 3. -
Page 8: Remote Control
REMOTE CONTROL Controls 1. POWER button 2. VCR button 3. DVD button 4. OPEN/CLOSE button 5. Number and other function buttons These buttons are used as number buttons and as function buttons of each name. • When using as a number button, press the appropriate button directly. -
Page 9: Inserting Batteries
WITH ALL APPLICABLE LAWS. MATSUSHITA 12, 18 FOR DETAILED INFORMATION, CONTACT YOUR LOCAL MITSUBISHI COUNTY SOLID WASTE AUTHORITY. PANASONIC 12, 18 QUASAR 12, 18 SAMSUNG SANYO Remote Control Range SHARP 00, 13 SONY TECHNOL ACE Remote sensor TOSHIBA ZENITH 09, 10 CHANNEL... -
Page 10: Basic Connections
BASIC CONNECTIONS Note: 3. Separate VHF and UHF Antennas Do not connect the power cord to a 120 V AC 60 Hz outlet Combiner until all connections have been made. 75/300 ohm inputs 75 ohm output (not supplied) TV Antenna Connections 300 ohm Twin If you are using an antenna system, follow these instructions. -
Page 11: Basic Tv Connections
Basic TV Connections Audio/Video Connection After you have connected the antenna to the DVD/VCR, you must connect the DVD/VCR to the TV. 1. Connect the DVD/VCR VIDEO OUT jack on the DVD/VCR to Below are 3 common methods of connecting your DVD/VCR to a the video in jack on the TV using the video cable supplied. -
Page 12: Optional, Preferred Tv Connections
Optional, Preferred TV Connections S-Video connection 1. Connect the S-VIDEO OUT jack on the DVD/VCR to the S- Video in jack on the TV using the optional S-Video cable. Note You can ONLY watch and listen to DVD playback through 2. -
Page 13: Catv (Cable Tv) Connections
CATV (CABLE TV) Connections IMPORTANT: Make sure the TV/CATV menu option is set to the “CATV” mode. Many cable companies offer services permitting reception of This DVD/VCR cannot receive scrambled programs since it does extra channels including pay or subscription channels. This not contain a descrambler. - Page 14 Incoming Cable DVD/VCR A/B Switch DVD/VCR OUTPUT AM LOOP VHF/UHF VHF/UHF VIDEO IN (ANT) ANT. FM 75Ω AUDIO OUT AUDIO Splitter Converter/ (6–CHANNEL) Descrambler Allows: Prevents: • Recording of one channel while watching another. • Watching scrambled channels while recording •...
-
Page 15: Speaker Connections
Speaker Connections Speaker Wire Color To achieve proper stereo reproduction, connect the speaker Black and Red Front right speaker wires without shorting to adjacent wires as shown below. Black and Blue Front left speaker Black and Green Center speaker Note: Black and Orange Surround right speaker Do not connect the power cord to a 120 V AC 60 Hz outlet... -
Page 16: Speaker Placement
Speaker Placement Need help? Call Front right speaker 1-800-813-3435 Center speaker Front left speaker Surround right speaker Subwoofer Place it near the Front speaker. Surround left speaker The supplied speakers have built-in magnetic stray field Center speaker compensation. They may be placed close to a TV without affecting Front left speaker Front right speaker the color purity. -
Page 17: Fm/Am Antenna Connections
FM/AM Antenna Connections CAUTION: When installing an outdoor antenna, follow the installation FM antenna instructions in the attached “IMPORTANT SAFETY The FM indoor antenna lead wire is sufficient to receive most INSTRUCTIONS”. local FM broadcasts and should be connected to the rear FM 75Ω... -
Page 18: Before Operation
BEFORE OPERATION Common Operation OPEN/ CLOSE q OPEN/CLOSE VOLUME AM/FM INPUT PRESET VOLUME CHANNEL EJECT VCR/DVD AM/FM OPEN/CLOSE VIDEO IN L-AUDIO IN-R STOP PLAY MINI –VOLUME+ z/ON PLAY a SOUND AM/FM BASS BOOST Turning the power on and off Press [z/ON] to turn the power on. (After connecting the power cord, when you press [z/ON] for the first time, the volume-reset feature automatically sets the initial volume level.) -
Page 19: Selecting Surround Mode
Selecting Surround Mode Press [SURROUND] to select the surround mode. Each time the button is pressed, the surround mode changes as follows: SURROUND AUTO v Surr (Surround) v HALL v LIVE v 2ch v AUTO ... Function FL display Description DVD/CD AUTO The unit selects the surround mode automatically depending on the disc. -
Page 20: Adjusting The Speaker Volume Balance
Adjusting the Speaker Volume Balance This unit is set to the standard level before shipping from the factory. You may not need adjustment. But, depending on the size of the room and the placement of the speakers, you may need a fine adjustment. In this case, follow the steps below. -
Page 21: Changing The Delay Time
Changing the Delay Time The sound from speakers can reach the listening position at different times depending the speaker placements. You can allow for this difference by changing the delay time of the center and surround speakers. 1. Press [n] to stop DVD playback completely. 2. -
Page 22: Setting The Video Channel
Setting the Video Channel Setting the Language To view playback of a recorded tape or DVD disk, or to watch a You can choose from three different languages (English, French program selected by the VCR’s channel selector, the TV must be and Spanish) for the on-screen displays. -
Page 23: Auto Clock Setting
Auto Clock Setting The Auto Clock feature enables the automatic clock setting and updating, and also to set the Time Zone and Daylight Saving Time by receiving XDS (Extended Data Service) information carried on the channel signal. Preparation: You must set the antenna connection before the AC cord plug is inserted into the AC outlet. - Page 24 Daylight saving time setting You can set the Daylight saving time automatically or manually. Preparation: • Turn ON the TV. • When a TV is connected with an audio/video cable, select the video input mode on the TV. • When a TV is connected only with an antenna cable, set to the video channel 3 or 4.
-
Page 25: Manual Clock Setting
Manual Clock Setting You must set the date and time for timer recordings. Preparation: • Turn ON the TV and set to the video input mode. • Press [VCR] to select the VCR mode. (The VCR indicator will light.) Example: Setting the clock to “8:30 AM” March, 23 (SAT), 2002. CLEAR/ 1. -
Page 26: Tuner Setting
Tuner Setting This DVD/VCR is equipped with a channel memory feature which allows channels to skip up or down to the next channel set into memory, skipping over unwanted channels. Before selecting channels, they must be programmed into the DVD/VCR’s memory. In addition to normal VHF and UHF channels, this DVD/VCR can receive up to 125 Cable TV channels. -
Page 27: To Add/Delete Channels
To ADD/DELETE Channels Noise Elimination You can add the channels you want or delete the channels you When you don’t want to receive a weak signal broadcast, the do not want manually. Blue back screen can be obtained by selecting the NO NOISE BACKGROUND “ON”. -
Page 28: Cassette Tape Playback
CASSETTE TAPE PLAYBACK Loading and Unloading a Cassette Tape To record again Cover the hole with a piece of adhesive tape. Use only video cassette tapes marked Loading Push the center of the tape until it is automatically inserted. Adhesive tape Tape speed and maximum recording time Video cassette tape Tape Speed... -
Page 29: Basic Playback
Basic Playback Preparation: • Turn ON the TV and set to the video input mode. • Press [VCR] to select the VCR mode. (The VCR indicator will light.) 1. Load a prerecorded tape (When loading a cassette tape without the erase prevention tab, playback will start automatically). -
Page 30: Special Playback
Special Playback Repeat playback The entire video tape will be played until its end. The tape will then automatically rewind to the beginning and the playback will Picture Search be repeated. Reverse picture search function: Press [d] x 1 or x 2 during the playback. 1. -
Page 31: Zero Return Function
ZERO RETURN Function This function makes tape-rewinding stop at the counter 00:00:00 position automatically. Preparation: • Turn ON the TV and set it to the video input mode. CLOCK/ • Press [VCR] to select the VCR mode. (The VCR indicator will COUNTER light.) 1. -
Page 32: Recording
RECORDING Recording a TV program Recording and viewing the same TV program Preparation: • Turn ON the TV and set to the video input mode. • Press [VCR] to select the VCR mode. (The VCR indicator will light.) 1. Load a cassette tape with the erase prevention tab intact. The VCR will automatically turn on. - Page 33 To stop recording Press [n] to stop recording. “n” will appear on screen for about 4 seconds. To stop recording temporarily Press [k] to avoid recording unwanted material. Press again to continue the recording. “m k” will appear on screen for about 4 seconds. DISPLAY Notes: TV/VCR...
-
Page 34: One-Touch Timer Recording (Otr)
One-touch Timer Recording (OTR) The One-touch Timer Recording feature provides a simple and convenient way to make a timed recording. Preparation: • Turn ON the TV and set to the video input mode. • Press [VCR] to select the VCR mode. (The VCR indicator will light.) Example: One-touch Timer Recording for 30 minutes. -
Page 35: Timer Recording
Timer Recording Timer recording can be programmed on-screen with the remote control. The built-in timer allows automatic unattended recording of up to 8 programs within 1 month. Preparation: • Press [VCR] to select the VCR mode. Load a cassette tape with the erase prevention tab intact. DISPLAY •... - Page 36 Timer recording special case Confirmation/Cancellation of the Timer recording Weekly (e.g. WKL-TU: each Tuesday) or daily (e.g. MO-SA: 1. If the Timer has been activated, press [TIMER REC] to Monday to Saturday) Timer recording deactivate the Timer. The clock symbol ( ) will disappear.
-
Page 37: Stereo Recording And Playback
Stereo Recording and Playback Separate Audio Program (SAP) The VHS Hi-Fi audio system permits high fidelity recording of Your VCR is fitted with a SAP broadcast system which enables MTS STEREO TV broadcasts. you to switch to a separate audio program when viewing a selected channel. -
Page 38: Duplicating A Video Tape
Duplicating a Video Tape Connection with Video camera If you connect the VCR to another VCR or camcorder, you can duplicate a previously recorded tape. Playback Camcorder Make all connections before turning on the power. 1. Load a blank cassette tape with the erase prevention tab To AV Jack intact into the recording VCR. -
Page 39: Playable Discs
PLAYABLE DISCS The following types of discs can be played on this unit. Recorded Disc size Maximum playing time Disc type and logo mark content Approx. 4 hours (Single sided disc) 5 inches Approx. 8 hours (Double sided disc) (12 cm) Audio DVD Video 3 inches... -
Page 40: Disc Playback
TV screen. If this occurs, load the disc correctly or 2. Press [DVD] to select DVD function. replace the disc. • “SANYO” logo appears on the TV screen. • The DVD indicator on the front panel will light. If a menu screen appears on the TV screen... -
Page 41: Stopping Playback
Stopping Playback n STOP PLAY a • Press [n] (or [n STOP]) once during playback. “ ” briefly appears on the TV screen. When you press [a] (or [PLAY a]), playback starts automatically from the point where you stopped. “a” appears CHANNEL EJECT VCR/DVD... -
Page 42: Selecting A Dvd Menu
Selecting a DVD Menu Notes: • The operation may differ depending on the disc used. • Selecting a menu may not be possible on some discs. 1. Press [DVD MENU] while holding [SHIFT] down. The main menu screen will appear. 2. -
Page 43: Title Search [Dvd]
Title Search [DVD] 1. Press [JUMP] while holding [SHIFT] down during playback or in the stop mode. The Jump screen appears on the TV screen. Example: Jump Time : --:--:-- Title Chapter : 2. Press [4] or [5] to select the Title. CLEAR/ CANCEL 3. -
Page 44: Time Search [Cd]
Time Search [CD] 1. Press [JUMP] while holding [SHIFT] down during playback or in the stop mode. The Jump screen appears on the TV screen. Example: Jump Time : --:--:-- Track : 2. Press [4] or [5] to select the Time. CLEAR/ 3. -
Page 45: Fast Playback
Fast Playback Fast forward playback Press [c] repeatedly to select the fast speed forward playback. Each time the button is pressed, the speed is changed. c v ca v caa v caaa (4 steps) Press [a] to return to normal playback. Fast reverse playback Press [d] repeatedly to select the fast speed reverse playback. -
Page 46: Frame By Frame Advance Playback [Dvd]
Frame by Frame Advance Playback [DVD] Press [k] during still picture. ZOOM • “ ” appears on the TV screen. Each time the button is pressed, the picture advances one frame. SHIFT Press [a] to return to normal playback. Notes: •... -
Page 47: Normal Repeat Playback
Normal Repeat Playback [DVD] 1. Press [PLAY MODE] while holding [SHIFT] down during playback or stop mode. The Play mode screen (“Repeat”) appears. PLAY MODE 2. Press [b], [a] or [ENTER] once or twice to select SHIFT Chapter or Title. Repeat: Chapter Repeat of chapter being played Repeat: Title... -
Page 48: Programmed Playback [Cd] [Mp3]
Programmed Playback [CD] [MP3] Up to 12 selections can be programmed. Programming procedure 1. Press [PLAY MODE] while holding [SHIFT] down in the stop mode. The Play mode screen (“Play Mode” and “Repeat”) appears. Play Mode : Off Repeat : Off 2. -
Page 49: Selecting Subtitle Language [Dvd]
Notes: Selecting Subtitle Language [DVD] • In some cases, the subtitle language is not changed to the This operation works only with discs on which multiple subtitle selected one. languages are recorded. • When a disc supporting closed caption is played, the subtitle and the closed caption may overlap each other on the TV 1. -
Page 50: Selecting On-Screen Information
Selecting On-Screen Information Example for DVD: Press [DISPLAY] repeatedly to show the disc information (Title, Chapter, Title elapsed playing time, Language, etc.). 1. Press [DISPLAY] during playback. MARKER Title total time SHIFT DISPLAY Title elapsed playing time 00:08:20 01:12:33 2. Press [DISPLAY]. Title total time Title elapsed playing time ENTER... -
Page 51: Mp3 Cd Operation
MP3 CD OPERATION Notes on MP3 files This player can play back the CD-R/RW that have recorded • The recommend recording setting for a high-quality sound is music data or MP3 files. However, some CD-R/RWs can not be 38 kHz, 44.1 kHz and 48 kHz of sampling frequency, and played back depending on the recording conditions. -
Page 52: Stopping Playback
4. Press [b] or [a] or [ENTER] to select folder. 5. Press [4], [5], [b], [a] or [number buttons (0–9)] to select your desired track. 6. Press [ENTER] to start playback. • In case the folder include more than 11 tracks, press [b] or [a] to display next track list. -
Page 53: Before Setting
® TVGuardian OPERATION In this instruction manual, the language in on-screen display is English. If you change the language (see page E21), please Need help? Call follow the selected language in on-screen display. 1-800-813-3435 Before Setting • Set the subtitle language to “Off” (See page E54.) •... -
Page 54: Dvd Speaker Mute Setting
DVD SPEAKER MUTE Setting SETUP/ 1. Press [SETUP/MENU]. MENU 2. Press [5] or [4] to select “TVGuadian SETUP” option, then press [ENTER]. ENTER 3. Press [4] or [5] to select “DVD SPEAKER MUTE” option, then press [ENTER]. TVGuardian SETUP DVD SPEAKER MUTE :ALL CC DISPLAY TVG MODE... -
Page 55: Initial Settings
INITIAL SETTINGS Once the initial settings have been completed, the player can Notes: always be operated under the same conditions. • In this instruction manual, the language in on-screen The settings will be retained in the memory until they are changed, display is English. - Page 56 Setting Picture Setting Sound 1. Press [SETUP/MENU] in the stop mode or No disc. Used to adjust the sound level between the powerful sound and the faint sound. 2. Press [a] to select “Picture”. 1. Press [SETUP/MENU] in the stop mode or No disc. 3.
-
Page 57: Setting Parental
Setting Parental Some discs are specified not suitable for children. Such discs can be limited not to play back with the unit. Number 1. Press [SETUP/MENU] in the stop mode or No disc. buttons 2. Press [a] to select “Parental”. 3. -
Page 58: Listening To The Radio
LISTENING TO THE RADIO To turn the unit on and listen to the last received station, press [AM/FM] on the remote control. Automatic/Manual Tuning 1. Press [AM/FM] to select FM or AM. 2. Automatic tuning Press [TUNE] + or – for at least 1 second to tune in a station. The unit will scan up or down the band and receive the next receivable station. -
Page 59: Listening To Preset Stations
Manual presetting 1. Tune in the station to be preset as described in “Automatic/ Manual Tuning”. Number 2. Press [SETUP/MENU]. buttons “Preset number” blinks. 3. While “preset number” is blinking, press [PRESET] + or – to select the channel to be preset. 2, 5 •... -
Page 60: Troubleshooting Guide
TROUBLESHOOTING GUIDE If you have followed the instructions and are having difficulty operation the unit, locate the SYMPTOM in the left column below. Check the corresponding POSSIBLE CAUSE and CORRECTIVE ACTION columns to locate and remedy the problem. Symptom Cause Correction No power. -
Page 61: Maintenance
Should this product require service, refer to the SANYO DVD limited warranty. If you do not have a convenient SANYO service station nearby, contact the SANYO dealer where you purchased the unit. Be sure to give the model number and explain the problem. The dealer will advise you how to obtain service. -
Page 62: Language Code List
LANGUAGE CODE LIST Enter the appropriate code number for the initial settings “AUDIO”, “SUBTITLE” and “MENU LANGUAGE”. Language Name Code Language Name Code Language Name Code Language Name Code Abkhazian 1112 Fiji 1620 Lingala 2224 Singhalese 2919 Afar 1111 Finnish 1619 Lithuanian 2230... -
Page 63: Specifications
520 kHz – 1,710 kHz (10 kHz steps) Usable sensitivity: 500 µV/m (AM loop antenna) IMPORTANT INFORMATION Because its products are subject to continuous improvement, SANYO reserves the right to modify product designs and specifications without notice and without incurring any obligation. -E62-... -
Page 64: Warranty
Acts of God, or normal wear and tear. The foregoing is in lieu of all other express warranties and SANYO does not assume or authorize any party to assume for it any other obligation or liability.