Table of Contents
Advertisement
Setting Examples Using the Set Wizard
MEAS SHAPE
Move the cursor to this line and press the SET
key. A popup menu will appear.
Move the cursor to "RECTANGLE,"
"CIRCUMFERENCE," or "ARC," and press the
SET key. In this example, select "RECTANGLE."
MEAS AREA
Move the cursor to this line and press the SET
key. The "SET" line will be highlighted. Press the
SET key again and the "RECTANGLE" setting
screen will appear.
7
Adjust the size of the rectangle by setting
"
UP.L" and "
corners) in order to establish the reference image
area.
UP.L The upper left corner of the rectangle can be moved up, down, left, and right.
LO.R The lower right corner of the rectangle can be moved up, down, left, and right.
The rectangle can be moved up, down, left, and right. Select "3MOVE" and
press the SET key to display a cross hair cursor on the screen. Now, move
MOVE
the rectangle by pressing the up, down, left, and right arrow keys. When it is
in position, press the SET key to confirm it.
Press the ESC key to return to the previous screen, and then select cell size.
CELL SIZE
In this setting example, do not set cell size, and press the ESC key.
After returning to the previous screen, select "NEXT" and press the SET key to go to next screen.
LO.R" (upper left and lower right
7-18
REG COND
SCREEN COND SAVE
1REGISTER NO
0 (0 7)
2MEAS SHAPE
RECTANGLE
3MEAS AREA
SET (224, 208) (287, 271)
4CELL SIZE
16 (4 96)
RECTANGLE
CIRCUMFERENCE
ARC
=VALUE INPUT ESC=BACK SEL=CHNG IMG TRG=FUNC
REG COND
RESET
RETURN
1UP. L
(224, 208)
2LO. R
(287, 271)
3MOVE
=MOVE ESC=BACK SEL=CHNG IMG TRG=FUNC
RED F C1 BRT
RED F C1 BRT
X:224 Y:208
Advertisement
Table of Contents
