Bios Setup; Bios Setup Main Menu - NEC VERSA UltraLite Service And Reference Manual

BIOS Setup

The notebook comes with a BIOS Setup Utility that allows parameter viewing and setting. BIOS
Setup also allows setting password features that protect the system from unauthorized use.
Use BIOS Setup to:
set the current time and date
!
customize the operating system to reflect the computer hardware
!
secure the system with a password
!
balance the performance needs with power conservation.
!
Access the BIOS utility at power-on by pressing
Press <F2> to Enter Setup.
When you press
and displays the current CMOS RAM settings.
If the system detects an error during POST, it prompts you with a double beep and a message:
"Press <F1> to resume." If you press
want to fix the error, carefully read the error message that appears above the prompt (taking
notes if you want), and press
discharged.

BIOS Setup Main Menu

After pressing
of the Main Menu window lists the following top-level menus.
Main
!
the system time and date, set diskette and hard disk parameters, or check memory
parameters.
Advanced
!
panel view, and more.
Security
!
disk boot sector.
Boot — Use this menu to set boot sequence.
!
Exit Exits the Setup utility with various save or discard options.
!
Use the keys listed in the legend bar on the bottom of the Setup menu to make the selections or
exit the current menu. The following table describes the legend keys.
2-8 System Configuration and Setup
to enter BIOS Setup, the system interrupts the Power-On Self-Test (POST)
F2
F1
. You will see this message if the CMOS battery becomes fully
F2
, the system displays the BIOS Setup Main Menu window. The bar at the top
F2
Use the Main menu for basic system configuration. For example, select Main to set
Use the Advanced menu to set IR serial port, I/O device configuration, LCD
Use this menu to set User and Supervisor passwords, password on boot, fixed
when the following prompt appears.
F2
, the system enters BIOS Setup automatically. If you