Locating the battery bay release latch
While holding the battery release latch to the right, slide the battery out of the notebook.
4.
Removing the secondary battery
A – Battery Bay Connectors
B – Battery Bay Release Latch
Install the new secondary (or optional Extra Life) battery as follows:
5.
Locate the alignment grooves on the edge of the battery and inside the battery bay (see
!
the following figure).
Align the grooves on the battery with the grooves in the bay.
!
Slide the battery into the bay until it is securely locked in place.
!
Turn over the notebook.
6.
Installing the secondary battery
A – Battery Bay Connectors
B – Battery Bay Release Latch
A – Battery Release Latch
C – Secondary Li-Ion Battery
C – Alignment Grooves
D – Secondary Li-Ion Battery
System Configuration and Setup 2-7