2.2.11 Wall Mounting (KX-TDA200)
WARNING
•
Make sure that the wall the shelf will be attached to is capable of supporting at least 4 times the
weight of the shelf.
•
Only use the wall-mounting equipment (anchor plugs, screws, metal bracket) included with the
PBX.
CAUTION
•
When placing the metal bracket, make sure that the "TOP" arrow is pointing upward.
•
Do not block the openings of the shelf. Allow space of at least 20 cm above and 10 cm at the sides of
the shelf.
•
Make sure that the surface behind the shelf is flat and free of obstacles, so that the openings on the
back of the shelf will not be blocked.
•
Make sure that the surface behind the shelf is not made of wood.
Notice
•
When driving the screws into the wall, be careful to avoid touching any metal laths, wire laths or metal
plates in the wall.
•
When this product is no longer in use, make sure to detach it from the wall.
•
Be careful not to drop the shelf.
1.
Install 4 anchor plugs in the wall, using the metal bracket as a template. Fix the metal bracket with 4 screws
(A).
Metal Bracket
Screw (A)
Anchor Plug
W a ll
Hammer
Screw (A)
Metal Bracket
2.2.11 Wall Mounting (KX-TDA200)
Anchor Plug
30 mm
Installation Manual
8 mm
65