In-call Options
While you're on a call, you will see a number of onscreen options. Tap an option to select it.
●
Add call: displays the dialer so you can call another person.
●
Keypad: displays the onscreen keypad, where you can enter numbers using DTMF
(Dual Tone Multi-Frequency). This is especially helpful if you need to enter an access
code or other information while on an active call.
●
End call: Terminate the call.
●
Speaker: Route the phone's audio either through the speaker or through the earpiece.
Because of higher volume levels, do not place the phone near your ear during
Warning!
speakerphone use.
●
Mute/Unmute: Turn the onboard microphone either on or off.
●
Headset: Connect to a Bluetooth headset.
●
Touch
for more options:
Contacts: Go to your Contact list.
Message: Send a message during a call.
Memo: Write down a memo during a call.
Noise reduction On/Off: Turn on the Noise reduction feature when you are in a
noisy area. Turn it Off when not needed to conserve battery power.
My call sound: Configure the audio equalizer used during an active call.
Phone Calls
43