Roll Paper Cannot Be Cut - Epson Stylus Pro 4000 Reference Manual

❏ Delete unnecessary files to make room on your hard disk
drive.
Note for Windows:
Your computer may not have enough memory. For further tips, see
"Increasing the Print Speed" on page 117.

Roll Paper Cannot be Cut

Try one or more of these solutions:
❏ Make sure that paper cutter cover is set correctly. See
"Replacing the Paper Cutter" on page 279.
❏ Make sure that the Roll Auto Cut On
Paper Source on the LCD. Press the Paper Source
if necessary. Then press and hold the Paper Source
for 3 seconds. The printer cuts the roll paper.
❏ Make sure that Normal Cut, Single Cut, or Double Cut is
selected as the Auto Cut in the printer driver. For Windows,
see "Making the Auto Cut setting" on page 77. For Mac OS
8.6 to 9.x, see "Making the Auto Cut setting" on page 162. For
Mac OS X, see "Auto Cut" on page 220.
❏ Cut the roll paper by hand if necessary. Check that the paper
thickness of the roll paper loaded in the printer matches the
paper specification (see "Paper" on page 330). If so, the paper
cutter may be blunt and require replacement. See "Replacing
the Paper Cutter" on page 279.
Note:
If you use roll paper other than Epson special media, see the user
documentation included with the paper, or contact your supplier.
is selected as the
Troubleshooting
7
7
7
7
7
7
button
button
7
7
7
7
7
7
313