Roll Paper Cannot Be Cut; Paper Feed Or Paper Jam Problems Occur Frequently - Epson Stylus Pro 10600 Reference Manual

❏ Delete unnecessary files to make room on your hard disk
drive.
Note:
Your computer may not have enough memory. For further tips, see
"Increasing the Print Speed" (Windows only).

Roll Paper Cannot be Cut

Try one or more of these solutions:
❏ Make sure that the Roll Auto Cut light is on. Press the Paper
Source button if necessary. Then press the Cut/Eject button.
The printer cuts the roll paper.
❏ Cut the roll paper by hand if necessary. Check that the paper
thickness of the roll paper loaded in the printer matches the
paper specification (see "Paper"). If so, the paper cutter may
be blunt and require replacement as described in "Replacing
the Paper Cutter".
Note:
If you use roll paper other than EPSON special media, see the user
documentation included with the paper, or contact your supplier.
Paper Feed or Paper Jam Problems Occur
Frequently
Try one or more of these solutions:
❏ Secure the roll paper you are not using with the roll paper belt
when two roll paper spindles are installed. See "Using the roll
paper belt".
-266