Related Manuals for NordicTrack Cx 1600 Elliptical
Summary of Contents for NordicTrack Cx 1600 Elliptical
- Page 1 Visit our website at www.nordictrack.com new products, prizes, fitness tips, and much more!
-
Page 5: Assembly
M8 Small M10 Split Wave Washer M10 Washer M8 Washer Washer (85)–20 (88)–4 (67)–14 Washer (18)–4 (69)–4 M4 x 16mm M4 x 19mm M8 x 19mm Button M8 Nylon M10 Nylon Screw (47)–6 Screw (57)–2 Screw (56)–4 Locknut (72)–4 Locknut (70)–2 M8 x 38mm Button M8 x 55mm Bolt M10 x 13mm Button... - Page 18 The columns of indicators will then move one column to the left,...
-
Page 19: To Use Preset Program
resistance settings will move one column to the left. - Page 20 all target heart rate settings will move one column to the left.
-
Page 23: Exerсise Guidelines
carbohydrate calories fat calories... - Page 27 90 91...
Need help?
Do you have a question about the Cx 1600 Elliptical and is the answer not in the manual?
Questions and answers
How do you change the belt
To change the belt on a NordicTrack CX 1600 Elliptical, follow these steps:
1. Remove the Left Pedal Disc: Unscrew the two M6x16mm button screws attaching the left pedal disc. Pivot the pedal disc out of the way without completely removing it.
2. Locate the M10 Flange Nut: Identify the M10 flange nut that secures the drive belt.
3. Adjust the Belt Tension: Turn the flange nut clockwise until the belt no longer slips during the power stroke.
4. Reattach the Pedal Disc: Once the belt is properly adjusted, reposition the pedal disc and securely tighten the screws.
If additional steps are required, refer to the elliptical's manual for detailed instructions.
This answer is automatically generated