Samsung GX-SM530CF User Manual page 25

Settings
 The Setup Procedure
14. Select Close, and then press the v button. The Connect RF Cable screen
appears.
15.
If you have not installed a CableCARD and not connected a Tuning Adaptor, go
to Step 16. If you have installed a CableCARD, but have not connected a Tuning
Adaptor, go to Step 18. If you have installed a CableCARD and connected a Tuning
Adapter, go to Step 19.
16.
If you have not connected the RF
cable from your cable outlet to
your product, do it now. Once you
have connected the cable, press
the ▶ button, and then press the
v button. If you have already
connected the RF cable, press the
▶ button, and then press the v
button.
\ The RF cable connects your product to the video transmissions from your
cable company. If you don't use an RF cable, select "I don't use an RF cable"
at the bottom of the screen, and then go to Step 26. Note that without an
RF cable connection, you won't be able to watch TV broadcasts.
If you have no network or have not connected the product to your network,
go to Step 23.
17.
If your cable company provided
a CableCARD, insert the card into
the slot on the back of the Smart
Media Player. The "CableCARD
is inserted" message appears.
Press the v button, and then
go to Step 18. If your CableCARD
is already installed, press the v
button, and then go to Step 18. If
you did not get a CableCARD or
want to use your product without
a CableCARD, select "I don't use a
CableCARD". Then, press the v
button, and go to Step 23.
18. If your cable company provided
a Tuning Adapter (SDV), and you
have not connected it, connect it
to the Smart Media Player now.
When done, press the ▶ button,
and then press the v button.
The Zip Code screen appears. For
additional information about the
the Tuning Adapter, refer to the
users manual provided by your
Cable Service Provider.
\ Do not connect the USB cable
to the Tuning Adapter and the
Smart Media Player until after
the Tuning Adapter LED light is
solid.
19.
Enter your Zip Code into the Zip
Code field using the number
buttons on the remote. If you
make a mistake, press the ◀
button to delete the mistake.
When done, press the v button.
20.
In the list that appears, select your
cable provider, and then press
the v button. The Confirmation
window appears.
21.
Press the v button to confirm
the information is correct.
23