Table of Contents
Advertisement
Connections
Connecting to a Network Router
Wireless Network
\ If the wireless router supports DHCP, your product can use a DHCP or static IP address to connect to the wireless network.
\ Set your wireless router to Infrastructure mode. Ad-hoc mode is not supported.
\ The product supports only the following wireless security key protocols:
- WEP (OPEN/SHARED), WPA-PSK (TKIP/AES), WPA2-PSK (TKIP/AES)
\ Select a channel on the wireless router that is not currently being used. If the channel set for the wireless router is currently being used by another
device nearby, it will result in interference and communication failure.
\ In compliance with the newest Wi-Fi certification specifications, this product does not support WEP, TKIP, or TKIP-AES (WPS2 Mixed) security encryption
in networks running in the 802.11n mode.
\ If your router supports WPS (Wi-Fi Protected Setup), you can connect to the network via PBC (Push Button Configuration) or PIN (Personal Identification
Number). WPS will automatically configure the SSID and WPA key in either mode.
\ Wireless LAN, by its nature, may cause interference, depending on the operating conditions (router performance, distance, obstacles, interference by
other radio devices, etc).
\ To use the Samsung Link function with your PC, you must connect your PC to your network.
\ Web Authentication based Internet services, such as Hotel on Office networks, are not supported during the Initial Installation.
POWER
Wireless Router
Broadband
service
19
Hide quick links:
Advertisement
Table of Contents
