Getting The Vpar Console - HP Integrity Superdome 2 16-socket Administrator's Manual

Figure 39 Booting vPar from the GUI

Getting the vPar Console

You can use either the command line or the GUI to access the system console of the virtual partition.
From the CLI
Use the co command with or without the partition ID.
Example 5 Example
co
Partition
Number
---------
1
2
2:1
Q)
Select partition number: 2:1
----Log Snippet---------
----Log Snippet---------
Welcome to the Superdome 2 console
Shell>
From the GUI
On the OA GUI, click the Remote Console tab to access the system console of the virtual partition
from the details page of each partition.
92 Managing and Booting Virtual Partitions
Partition
Name
---------
nPar0001
nPar0002
nPar0002:vPar0001
Quit
<use <Ctrl-b> to exit.>