monarch enclosure. This flash image is used to update the firmware for HP Superdome
2 cell blades within the specified partitions.
◦
The <uri> must be formatted as usb://<path> for USB installations. Use the SHOW USBKEY
command to obtain the <path>.
The supported protocols for network installations are HTTPS, HTTP, TFTP, and FTP.
◦
The <uri> must be formatted as protocol://host/path/filename for network
◦
installations.
If your ftp server does not support anonymous logins, a username and password can be
◦
specified within the <uri> with the following format:
ftp://username:password@host/path/filename.
◦
The FORCE argument must install a firmware bundle that is a lower revision level than
what is currently installed on the partitions.
◦
The REINSTALL argument forces the system to update the firmware of the specified
partitions regardless of current firmware revision.
The NOEXECUTE argument stops the command without updating firmware.
◦
Access level/Bay level:
OA Administrator, OA Operator
Restriction:
You must be connected to the monarch OA.
UPDATE SHOW NPARTITION
CLI
Command:
UPDATE SHOW NPARTITION {nPartition name or number |ALL }
Description:
Displays the version of the firmware bundle currently installed on the server blades within the
specified partitions.
Access level/Bay level:
All
Restriction:
None
GUI
To view Firmware Summary information, click the Firmware Summary link.
Task Summaries for Rebooting and Resetting Partitions
71