HP Integrity Superdome 2 16-socket Administrator's Manual page 37

nl
nl
[Partition]
Par State/
Num RunState
=== ======================= ======= ====== ====== ============= ===============
* D-Degraded
** Actual allocated for Active and User requested for Inactive partitions
2. Create an nPartition with one blade and one I/O bay using the following command:
parcreate -P nPar0002 -a blade:1/2:::: -a io:5/1::
nl
Command succeeded
The following output is displayed:
-
parstatus -P
[Partition]
Par State/
Num RunState
=== ======================= ======= ====== ====== ============= ===============
2 Inactive /DOWN
* D-Degraded
** Actual allocated for Active and User requested for Inactive partitions
NOTE: The nPartition is created with the default settings for most of the nPartition attributes.
Some of the default settings are:
(i) ILM/SLM ratio - 1:7
(ii) ILM granularity - 1024 MB
(iii) SLM granularity - 1024 MB
(iv) Hyperthreading - Enabled
(v) Defaults assigned for partition identifier and parspec name (1 and ps0001).
For more information on creating nPartitions, see
38).
Status* # of # of
Blades IOBays SLM
Status* # of # of
Blades IOBays SLM
OK 1 1
"Creating and configuring nPartitions" (page
Sample procedure for creating nPartitions
ILM/ Partition Name
(first 15
(GB)** characters)
ILM/ Partition Name
(first 15
(GB)** characters)
16.0/112.0 nPar0002
37