When The Message "The Current Paper Drawer Is Empty." Appears; Adding Paper - Hitachi DDC 35N Operator's Manual

5-2

1. When the Message "The current Paper Drawer is empty." Appears

Adding paper

1st Drawer
Slide out the 1st Drawer.
1
Press the Paper Lifting Plate down until it
2
locks.
When the drawer currently selected for use runs
out of paper, the message shown on the left
appears. The current copy cycle is interrupted and
you cannot start a new copy cycle.
The blinking drawer has run out of paper.
Add paper by using the following procedure.
1168P154DC
Load the paper stack into the Drawer so that
3
its front side faces up.
1166O077AA
NOTE
The paper should be loaded no higher than the
(Max. Level Indicator).
Pinch the tabs on the Edge Guide and
4
Trailing Edge Stop and slide them to the
exact size of the paper loaded.
1166O078AA
1166O079AA
1166O080AB