Table of Contents
Advertisement
1/5
Memory Recall
Select whether to enable ("ON") the function that
allows you to use the same image data of the copy
cycle that has just been completed or not ("OFF).
The initial setting is "OFF."
Mixed Original Detection
Select whether to default to Mixed Original
Detection ("ON") or not ("OFF").
The initial setting is "OFF."
Priority Device
<This key is available with an optional Printer
Controller>
Select the main function you will use.
Copier: The copier prints out the data after
receiving all of it.
Printer: The copier prints out the data as it is
received.
The initial setting is "Copier."
Language Selected
Select the language of the Touch Panel messages.
The initial setting is "English."
2. Making the User's Choice Settings
2/5
Original Copy Default
Specify the original
copy type automatically
selected when power is turned ON or panel reset.
The initial setting is "1-Sided
Auto Paper/Auto Size
Specify the default mode selected automatically
when power is turned ON or panel reset, either
"Auto Paper," "Auto Size." or "Manual."
The initial setting is "Auto Paper."
Tray Priority
Specify the default paper source that is
automatically selected.
The initial setting is "1" (1st Drawer).
Special Paper
Designate the drawer for the kind of paper.
The initial setting is "Normal" for all drawers.
See p. 3-6 for Special Paper Setting.
*Special Paper can only be used for the 1st Drawer
and Manual Bypass Tray.
2in1, 4in1, Booklet Copy Zoom
Select whether to enable ("ON") or disable
("OFF") recalling a default zoom ratio for 2in1,
Booklet Creation, or 4in1 copying and 2in1
Separation.
Default zoom ratios:
2in1
: 0.707
Booklet Creation : 0.707
4in1
: 0.500
2in1 Separation : 1.414
The initial setting is "ON."
4-5
1-Sided."
Advertisement
Table of Contents
