Eavesdropping While Connection Is Established; Printing Lists - Philips Faxjet 335 User Manual

long the device should ring before the device detects that it
is a telephone call (no fax).
1 Press MENU several times until INSTALLATION
appears on the display.
2 Confirm using o.
3 Press o several times until, e.g. FAX/TEL TIM-
ER:20 appears on the display.
4 Select the desired ring duration in seconds using u.
5 Confirm using o.
6 You can exit with j.
Setting the timer
For the reception mode PHONE/FAX or TAD/FAX you
can set when the device is to ring before it picks up. This
makes it possible for you to receive faxes silently at night
without getting disturbed.
1 Press MENU several times until INSTALLATION
appears on the display.
2 Confirm using o.
3 Using [ select ENHANCED FEATUR. .
4 Confirm using o.
5 Press o several times until, e.g. SILENT RX: NEV-
ER appears.
6 Using u select SILENT RX: DAILY .
7 Confirm using o.
8 Enter the time at which the ring tones are to be
switched off (night mode) e,g, 22 00 for 10 pm.
9 Confirm using o.
10 Enter the time at which the ring tones are to be
switched on (day mode) e,g, 06 00 for 6 am.
11 Confirm using o.
Special settings
Silent fax reception
For the reception mode PHONE/FAX or TAD/FAX you
can set whether the device is to ring before it picks up. This
makes it possible for you to receive faxes silently without
getting disturbed.
1 Press MENU several times until INSTALLATION
appears on the display.
2 Confirm using o.
3 Using [ select ENHANCED FEATUR. .
4 Confirm using o.
5 Press o several times until, e.g. SILENT RX: NEV-
ER appears.
6 Useu to select from the following settings:
SILENT RX: NEVER – Faxes are received with prior
ringing.
SILENT RX:ALWAYS – Faxes are received without
prior ringing.
7 Confirm using o.
Receiving faxes manually
Select manual reception under reception mode of the fax
switch ( MANUAL ). The device will not receive faxes on its
own. After picking up the handset, you can start fax recep-
tion manually, by pressing o. This setting is useful, when
you want to receive faxes via a modem connected to a com-
puter.
Eavesdropping while connection is
established
You can eavesdrop while the connection is establish.
1 Press MENU several times until INSTALLATION
appears on the display.
2 Confirm using o.
3 Press o several times until, e.g.
TOR:ON appears on the display.
4 Using u select whether the speaker should be
switched on while establishing the connection or not .
5 Confirm using o.

Printing lists

Call log
The call log contains the last 50 dialled numbers.
1 Press MENU several times until PRINT OUT RE-
PORT appears on the display.
2 Confirm using o.
3 Using u select PRINT: ID LIST .
4 Confirm using o. The caller list will be printed.
Printing transmission report
Printing a Transmission Report
After every transmission, the machine prints out a trans-
mission report. If a transmission error occurs, an error re-
port is printed out. You can switch off printing of the
transmission report.
1 Press MENU several times until FAX SET-UP ap-
pears on the display.
2 Confirm using o.
3 Using [ select VARIOUS SETTINGS .
4 Press o several times until TX REPORT:ALWAYS
appears on the display.
5 Using u: select
TX REPORT:ALWAYS . Transmission report is al-
ways printed after each transmission.
FAILED TX REPORT Transmission report is printed
only after a transmission error
TX REPORT: OFF Printing of the transmission re-
port switched off.
6 Confirm using o.
7 You can exit with j.
LINE MONI-
25