Panasonic FP-D355 User Manual page 33

Printer Settings (User Preset Mode)
(Key Operator Only)
Following settings become available by touching "09 Key Operator" and
input the Key operator ID number on the menu screen.
User preset mode, printer
00 HDD spool area format
01 Spool function
02 Flash ROM update accept
03 Dump list mode
04 Hard disk status
1 / 2
Screen
Modes
No.
00 HDD spool area format
01 Spool function
02 Flash ROM update
accept
1/2
03 Dump list mode
04 HDD status
05 Clear all security job
2/2
06 First print priority
C To reset the user preset mode, press User Preset key on the printer control panel.
NOTE
OK
No
No
Release
0
Selection of spool capacity of the hard disk
(HDD)
C None, 128 MB, 256 MB, 512 MB
Selecting to spool the data or not to the
printer HDD when using as network printer.
C No/Yes
Selection to update of the program in the
printer controller from the PC, or not.
C No/Yes
When selected yes, contact your service
technician.
Selection to print data code transferred from
the PC.
C Transfer/Release
When selected release and printed, contact
your service technician.
Selection of capacity/usage area of the hard
disk.
C HDD capacity, Font area capacity, Font
area usage ratio, Spool area capacity,
Spool area usage ratio.
Selection to clear of the registered all
documents in the hard disk.
C Stop/Start
Aelection of the first print priority
C No/Yes
34
User preset mode, printer
05 Clear all security job
06 First print priority
07
08
09
2 / 2
Function
OK
No
Initial setting
128 MB
No
No
Release
All zero
Stop
No