Panasonic FP-D355 User Manual page 16

Setting up Print Condition
For Windows 95/98/Me/2000
(7) Details
C Both PCL5e and PS
are the same screen.
No Item
#
Print to the
following port
$
Print using the
following driver
%
Timeout settings
&
New Driver
Following item will be used when using as a network printer.
(
Capture Printer port
)
Add Port
*
Delete Port
+
End Capture
-
Spool Settings
.
Port Settings
Setting
FILE: creates a file on disk
LPT1: Printer port
Displays the currently selected
default printer.
Displays error indication when its over wait
time setting after transmitting the document
data.
C Not selected: Waiting time from sending
data to recognize the next data.
C Transmission retry: After error display,
waiting time after sending
the data to retry.
Installing another printer driver.
Set up the timing when print data is sent to
the printer.
C After spooling the entire print job
C After spooling the first page of data
C Without spool
It allows to set the printer port which is using
C Spool print job of MS-DOS (S)
C Check port condition before printing (C)
17
Default setting
LPT1: Printer
port
Display all print
drivers which
selected Regular
Use Printer
15
45
After spooling the
data from the first
page
Check the port
condition before
printing