10
en | Advanced Setup
Function
NIGHTSENSE
EXIT
3. Only available in Day/Night version cameras, color versions show NightSense.
NOTICE!
If SensUp is active, some noise or spots may appear in the picture. This behavior is normal.
SensUp may cause some motion blur on moving objects.
Depending on the camera GAIN setting, unrelated menu items are not active.
4.2.4
ALC -> SHUTGAIN -> DAY/NIGHT Submenu
Function
DAY/NIGHT
SWITCH LEVEL
PRIORITY
IR CONTRAST
MONO BURST
EXIT
NOTICE!
Depending on the camera's DAY/NIGHT setting, unrelated menu items are not active.
F.01U.216.346 | 1.0 | 2011.04
Selections
AUTO, OFF, FORCED
Selections
AUTO, COLOR, MONO –
(-15 to +15)
COLOR, MOTION
NORMAL, ENHANCED
ON, OFF
User Manual
AutoDome 100 Series Fixed Camera
Description
–
UTO mode: Camera automatically
switches to NIGHTSENSE in low light
conditions.
–
OFF mode: NIGHTSENSE is turned off.
–
FORCED mode: The camera is set to
NIGHTSENSE (black and white) mode.
Returns to the ALC menu.
Description
AUTO: Switches the filter between COLOR
and MONO depending on the scene
illumination level.
–
COLOR: Use for normal daylight conditions.
–
MONO: Removes the IR filter, providing full IR
sensitivity.
Sets the video leveling threshold when the camera
switches to monochrome operation.
in AUTO mode:
–
COLOR: Displays a color image as long as the
light level permits.
–
MOTION: Avoids motion blur as long as the
light level permits.
–
NORMAL: Optimizes contrast in monochrome
applications with visible light illumination.
–
ENHANCED: Optimizes contrast in
applications with high IR illumination levels.
–
ON: The color burst remains active, even in
Monochrome mode.
–
OFF: The color burst in the video signal is
switched OFF in Monochrome mode.
Returns to the SHUTGAIN menu.
Bosch Security Systems, Inc.