Day/Night Submenu - Bosch VDN-498V03-11 Installation Manual

FlexiDome2X
Item
SensUp
Dynamic
EXIT
5.5.4

Day/Night submenu

Item
Day/Night
Switch level
Bosch Security Systems
Selection
Off, 2x, 3x, ...,
10x
Selection
Auto, Color,
Monochrome
-15 to +15
Installation Manual
Description
Selects the factor by which the sensitivity of
the camera is increased. It is dynamic and so
is only active when light levels are low.
When active, some noise or spots may appear
in the picture. This is normal camera
behavior. It may also cause motion blur on
moving objects.
Returns to main menu.
Description
Auto - the camera switches the IR cut-off filter
on and off depending on the scene
illumination level.
Monochrome - the IR cut-off filter is removed,
giving full IR sensitivity.
Color - the camera always produces a color
signal regardless of light levels.
Sets the video level in Auto mode at which
the camera switches to monochrome
operation.
A low (negative) value means that the camera
switches to monochrome at a lower light
level. A high (positive) value means that the
camera switches to monochrome at a higher
light level.
Configuration | en
AR18-08-B010 | v1.0 | 2009.03
35