NEC Express5800 320Fd-MR User Manual page 87

When you stop the PCI module and a failover occurs, the following event or change will
occur:
- The screen of the server turns black and nothing is displayed thereafter (this is not a
failure).
- The DVD-ROM drive becomes unable to use (this is not a failure).
- The status LEDs of the PCI module change as follows.
[Indications of the status LEDs]
CPU/IO module status LED1
1
2 CPU/IO module status LED2
*indicating primary or secondary after failver
4.
Restart the PCI module.
From the ft server utility, click [Start] of [Start/Stop] to the PCI module which was stopped in
the step 3, and the PCI module will be started. Once the PCI module is started, PCI module
diagnosis and PCI module duplication are performed.
The PCI modules' status LEDs changes as shown below:
[Indications of the status LEDs]
Immediately after the PCI module startup until the completion of diagnosis
1 CPU/IO module status LED1
2 CPU/IO module status LED2
When duplication of disks is started after the completion of PCI module diagnosis
1 CPU/IO
LED1
2 CPU/IO
LED2
LED
LED
LED
module status
module status
ESX Server Operation and Configuration 3-5
Secondary*
Amber
-
Secondary
-
-
Secondary
-
Green blinking
Primary*
-
Green blinking
Primary
-
Green blinking
Primary
-
Green blinking