Table of Contents
Advertisement
Installing the Air Duct
1. Position the air duct covering the front and rear system fans.
2. Position the air duct tabs (Figure 4, C) into the slots in the chassis rear panel.
3. Position the air duct plunger (Figure 4, B) over the locking hole in the
chassis and push the plunger inwards to secure the air duct to the system
chassis.
Installing the Side Panel
1. Before replacing the side panel, make sure no tools or loose parts have been
left inside the system chassis.
2. Make sure all option boards are firmly seated in their respective slots and
that all interior cables are properly connected.
3. Insert the metal tabs on the top and bottom of the side panel into their slots
on the chassis. Slide the side panel rearward as far as it will go.
4. Replace the side panel retaining screw (see Figure 3, A).
Installing the Front Door
1. Position the front door so the mounting pins of the front door are aligned
with their mounting holes on the front of the system. See Figure 2. Slide the
lower mounting pin into its mounting hole and then slide in the upper pin.
2. Close and lock the front door.
3. Plug in the system power cord, and turn on the system.
12
120Le Pentium III Processor Installation
Advertisement
Table of Contents
