NEC Express5800 1160Xd User Manual page 47

Table 2-1. EFI Shell Commands (continued)
Command
help help [-b] | [cmd]
hexedit hexedit [[-f] FileName | [-d
DiskName Offset Size] | [-m
Offset Size]
load load file [file ...]
LoadPciRom LoadPciRom [FileName]
ls ls [-b] [-r] [-a [attrib]] [file]
map map [-r|-v|-d] [sname] [handle] [-
b]
memmap memmap [-b]
mkdir mkdir dir [dir ...]
mm mm Address [Width 1|2|4|8]
[;MMIO| ; MEM| ; IO | ;PCI]
[:Value] [-n]
mode mode [row col]
mount mount BlkDevice [sname]
mv mv src [src ...] [dst]
OpenInfo OpenInfo Handle
pause pause
pci pci [Bus Dev [Func] [-i] [-s
[Seg]]]
reset reset [-w [string]]
rm rm [-q] file [file ...]
rm [-q] directory [directory ...]
set set [-d|-v|-b] [sname [value]]
setsize setsize newsize file
stall stall microseconds
time time [hh:mm[:ss]]
touch touch [-r] filename
type type [-a|-u] [-b] file [file ...]
unload unload [-n] [-v] HandleIndex
ver ver
Description
Displays the help information.
Edits in hexadecimal mode.
Loads the EFI driver.
Loads the PCI option ROM image from
the file.
Displays the directory/file list.
Displays and defines the mapping
information.
Displays the memory map.
Creates a directory.
Displays and changes MEM/IO/PCI.
Displays and changes the mode of the
console output device.
Mounts the file system on the block
device.
Moves the file/directory.
Displays the protocol of the handle/agent.
Displays a message and waits for input.
Displays the configuration space of the
PCI device.
Resets the system.
Deletes the file/directory.
Displays, creates, changes, and deletes
the EFI environment variable.
Sets the file size.
Stalls the processor in units of
microseconds.
Displays the current time or sets the time.
Sets the current date/time to the date/time
attribute of the file.
Displays the content of the file.
Unloads the protocol image.
Displays the version information.
System Operation 2-15