Table of Contents
Advertisement
First Things First
Under Cabinet Mounting
EN
Instructions
Tools Required
• Drill and
1
/
" Drill Bit
4
• Ruler or Tape Measure
• Nail or Awl
• Scissors
• Screwdriver - Phillips
• Countersink (Optional)
• Masking Tape
• Safety Glasses
Parts Packed with your Unit
Spacers
3 —
1
/
3 —
1
/
3 — 1"
USE:
3
3 — 2
/
" Phillips head screws
4
or
3 — 1
5
/
" Phillips head screws
8
1 — Mounting
template
1
Untitled-1
"
4
3 — Washers
"
2
2 — Cord hooks
3
Before Mounting
Empty contents of the selected cabinet under
which the unit will be mounted and thoroughly
clean the underside of the cabinet to remove
any grease residue which might be present.
We recommend the unit be mounted at the
front edge of the cabinet.
Important: For secure mounting, the screws
must go into the radio to a depth of at least
3
/
". If the overall length from the bottom of
8
the cabinet shelf to the bottom of the over-
hang is more than 1
3
/
", then a wood shim will
4
be necessary. A shim can be made from a sheet
of plywood, using the Template to locate the
central lines for drilling the
The shim can be located between the cabinet
shelf bottom and spacers. Make sure the wood
is at least as thick as the excess over 1
shim is necessary, longer screws are required.
Longer screws (Type #10-32) are available at
most local hardware stores.
Cut out the Template on the line indicated. The
Template size and screw hole positions are
identical to the top of the clock radio.
2/7/03, 10:08 AM
1
/
" mounting holes.
4
3
/
" If a
4
Hide quick links:
Advertisement
Table of Contents
