Using The Countertop Light; Replacing The Bulb; Setting Clock; Setting The Time - GE 7-5295 Manual

Using the Countertop Light

The countertop light switch is located on the side
of the unit, and has three settings: HI, LO, and
OFF.
• For dimmer light, move the light switch to the
LO position.
• For more illumination, switch to HI.
• To turn the light off, place Light switch to OFF.

Replacing the Bulb

1. Unplug the unit cord from the AC power
outlet.
2. Unlatch the cover to open it.
3. Unscrew and remove the bulb.
4. Install the replacement bulb.
5. Swing the cover up and snap it in place.
6. Plug the cord into the AC outlet, and reset the
clock.

Setting Clock

Setting the Time

The time display has a 12-hour format with AM
and PM indicator. To set the time:
1. Press SET to enter time setting mode.
The red Clock icon will appear on the
display.
2. To set clock time, use the
TRK (SEARCH•TUNE)
select the correct time.
Press and hold to fast forward or fast reverse
clock time.
3. Press SET again to save clock time. The red
Clock icon will turn off.
Untitled-1
CAUTION: CAUTION: CAUTION: Use only appliance-type bulb CAUTION: CAUTION:
with a maximum of 40-watt or equivalent
for replacement. To prevent hazard, do
not operate light without the cover.
Setting the Countdown
Timer
1. Press TIMER ON/OFF to enter timer setting
2. To select countdown time, use the
/ buttons to
3. Press TIMER ON/OFF again to activate the
4. Press TIMER ON/OFF to turn timer off at any
NOTE: NOTE: NOTE: The radio or CD player is muted NOTE: NOTE:
when alarm turns on.
10
DISC PLAYER
OFF RADIO
CD STOP PLAY/PAUSE
TIMER ON/SET OFF
TRACK
SEARCH
fer REPEAT SHUFFLE
HOUR MINUTE SET
Hz
kHz
mode.
The red TIMER icon will flash on the display.
TRK (SEARCH•TUNE) /
select the correct time.
Press and hold to fast forward or fast reverse
countdown time.
timer. The unit will beep twice to indicate
countdown has started.
The red TIMER icon will remain lit during
countdown.
time or after it has sounded.
2/7/03, 10:08 AM
EN
buttons to
8