Table of Contents
Advertisement
Care and Maintenance
Troubleshooting Tips for
EN
the Remote Control
• Is the unit plugged into a working AC outlet?
Try plugging it into one that you know will
work.
• Is the unit on?
Press BAND RADIO ON / PLAY PAUSE
to turn the unit on.
• Have you selected the correct function when
pressing on the buttons?
For example, if the unit is in CD mode and you
try tuning to a particular radio frequency, the
remote control is not going to look like it's
working. In such cases, press BAND RADIO ON
to select radio or PLAY PAUSE
CD function first, then press on the buttons.
• Are the batteries weak?
Try replacing old batteries with some fresh ones.
• Are you pointing the remote control directly at
the unit while pressing the buttons?
You should be, because the remote control
sensor at the unit is right at the center of the
display.
• Are you too far from the unit when using the
remote control?
The remote control sensor can only sense signals
(from the remote control) within a limited
distance. So move closer towards the unit.
• Are there any obstacles between the remote
control and the unit?
If there are, move all objects standing in the
way between the remote control and the unit.
Precautions
• Never open the cabinet under any
circumstances. Any repairs or internal
adjustments should be made only by a trained
technician.
• Warning: Never operate this product with the
cabinet removed.
• The CD player of this unit uses a laser to read
the music on the disc. The laser mechanism
corresponds to the cartridge and stylus of a
record player. Although this product
incorporates a laser pick-up lens, it is completely
safe when operated according to directions.
• Discs rotate at high speed inside the player. Do
not use damaged, warped or cracked discs.
• Do not touch the pick-up lens which is located
inside the disc compartment. Also, to keep dust
from collecting on the pick-up lens, do not
leave the compartment door open for an
extended period of time.
11
Untitled-1
Cleaning the Exterior
Prior to cleaning the exterior, be sure to unplug
the power cord from the AC power outlet. Wipe
the exterior with a soft, clean, and slightly water-
dampened cloth.
Handling Compact Discs
• Do not touch the signal surfaces. Hold by the
edges, or by one edge and the hole.
• Do not affix labels or adhesive tape to the label
surfaces. Also, do not scratch or damage the
label.
• Discs rotate at high speeds inside the player. Do
not use damaged (cracked or warped) discs.
to select
Cleaning Compact Discs
• Dirty discs can cause poor sound quality. Always
keep discs clean by wiping them gently with a
soft cloth from the inner edge toward the outer
perimeter.
• If a disc becomes dirty, wet a soft cloth in water,
wring it out well, wipe the dirt away gently, and
then remove any water drops with a dry cloth.
• Do not use record cleaning sprays or anti-static
agents on discs. Also, never clean discs with
benzene, thinner, or other volatile solvents
which may cause damage to the disc surface.
CD Lens Care
When your CD lens gets dirty it can also cause the
unit to output poor sound quality. To clean the lens
you will need to purchase a CD lens cleaner which
can maintain the output sound quality. For
instructions on cleaning the CD lens, refer to the
ones accompanying the lens care.
The descriptions and characteristics in this owner's manual are
for the purpose of general reference only and not as a
guarantee. In order to provide you with the highest quality
product, we may make changes or modifications without
prior notice. The English version serves as the final reference
on all product and operational details should any
discrepancies arise in other languages.
13
2/7/03, 10:08 AM
Hide quick links:
Advertisement
Table of Contents
