Advertisement
Available languages
Available languages
Always turn thedowndraft blower onbefore y oubegin cooking
toestablish anairflowinthekitchen. Lettheblower runfora
few minutes toclean t heairafter y outurn thecooktop off.This
will k eep thewhole kitchen c leaner and brighter.
CONTROLS
_hb
ARNING: Always disconnect electric power
supply before cleaning
unit.
Use a mild detergent suitable for painted surfaces. DO NOT
USE ABRASIVE CLOTH, STEEL WOOL PADS, OR SCOUR-
ING POWDERS. Vacuum blower to clean. Do not immerse
blower in water.
Wash the 2 aluminum grease filters in a mild detergent solution
or a dishwasher. Remove them from the air vent by grasping
the tab at the top of each filter.
The filters are different sizes. Be sure to replace them as
removed (wider one on the left), with tabs UP.
Turn the downdraft blower ON by pressing down on the activat-
ing switch. The air vent will rise.
KNOB
_
ARNING: Always disconnect
electric power
supply before servicing unit.
It may be necessary to remove the downdraft blower system from
the cabinet in order to service components
such as the blower
motor or air vent mechanism.
Disconnect
power to the cooktop and remove it first. Reverse
the steps under "MOUNT THE UNIT" to remove the downdraft
from the cabinet.
The blower can be turned ON or OFF and its speed can be
adjusted with the recessed knob on the right side of the air vent.
Turn the downdraft blower OFF by pressing the activating switch
again. The air vent will go down and the blower will shut OFR
For most convenient
operation,
set the blower to your
favorite
speed. The blower
will come on to this speed
whenever
the activating
switch
is pressed and the air
vent rises.
cn
O_
cn
3
Advertisement
