Setting The Administrator Username And Password - Drobo B1200i Manual

Setting the Administrator Username and Password

1. In Drobo Dashboard, make sure the Drobo B1200i is selected from the All Drobos page.
2. Click the Tools option on the Navigation menu.
3. Click the link that reads: Click here to password protect this Drobo device.
The Admin Settings page opens.
4. Ensure that the Enable administrative password protection check box is selected.
5. In the Username text box, enter a username for the administrator. "Admin" is the default.
6. In the Password text box, select the default text that appears there, press the Delete
key and enter a password for the administrator.
7. In the Confirm Password text box, select the default text that appears there, press the
Delete key and re-enter the password you just typed.
8. Click the OK button.
You are returned to the main page in Drobo Dashboard, showing that you are now
connected to Drobo B1200i with the username you entered.
You are now ready to configure network settings for the iSCSI data ports, as applicable.
drobo.com | Getting Started Guide for Drobo B1200i |
18