Strip Motor Torque Selection; Stabilizer Function Selection - Toshiba B-SX6T SERIES System Mode Manual

2. SYSTEM MODE

2.2.29 Strip Motor Torque Selection

This parameter is to choose a strip motor torque.
When "<2>PARAMETER SET" appears, press the [PAUSE] key until the following display appears.
<2>PARAMETER SET
PEEL OFF TRQ R0
NOTE: This parameter is fixed to R0.
Press the [PAUSE] key to skip.

2.2.30 Stabilizer Function Selection

This parameter is to choose whether to use the stabilizer function.
The stabilizer function reduces the sound of printing.
When "<2>PARAMETER SET" appears, press the [PAUSE] key until the following display appears.
<2>PARAMETER SET
STABILIZER ON
Use the [FEED] or [RESTART] key to select a desired option.
[RESTART]
[FEED]
After selecting the stabilizer function, press the [PAUSE] key.
NOTE: The stabilizer function is available only to the thermal direct print mode.
STABILIZER ON
STABILIZER OFF
ON: Sound of printing is reduced.
OFF: Normal printing
2-34
EO13-33002
2.2 Parameter Setting