Advertisement
HOW TO OPERATE
YOUR WASHER
WARNING--To
reduce the risk of fire, electric shock, or injury to persons,
read the IMPORTANT
SAFETY
INSTRUCTIONS
before operating
this appliance.
COLD
MED
Wash Temperature
Water Level
PermPress
Delicate
OFF * s
* o
Regular
0
O
GO
Set the controls
See the Controls Setting Guide.
O
Select Wash Temperature.
Cold rinse will be
automatically
provided
with all cycles.
Select Water Level.
LOW: Washer is less than 1/3 full of clothes.
MED: Between
1/3 and 2/3 full.
HIGH: Over 2/3 full of clothes.
PULt rO
STanT-PUSR
TOSVOP
Push Cycle Selector
in and turn clockwise
to
your selected wash cycle.
Pull Cycle Selector
out to start the cycle.
NOTE:
If you wish to change cycle setting after
washer has started, push Cycle Selector in and wait
for washer to stop. Then reset to the new position.
Setting can be changed
at any time during the
Regular, Perm Press or Delicate cycles.
Self-cleaning
lint filter
The lint filter needs no attention
from you. Lint collected
during
washing and rinsing of clothes is automatically
flushed down
the drain.
How to soak in the washer
Set wash temperature
control. Add detergent
or soak agent. Turn Cycle Selector to
desired cycle. Start the washer. After washer fills and begins to agitate, push in the Cycle
Selector
to stop washer. Allow to soak, turn to Spin. Pull out the Cycle Selector to complete
the cycle.
Delicate
Cycle
To get the full benefit of the Delicate Cycle, always
set the Cycle Selector
at the beginning
of the cycle.
During wash, the Delicate Cycle alternates
between
agitation
and pause, to protect delicate clothes.
Delicate
SPIN
RINSE
START
=
OFF
15
8
Advertisement
