Advertisement
Dryer
If your dryer is exhausted
to the outside, inspect and
clean the dryer exhaust ducting at least once a year.
A clothes dryer produces
combustible
lint. When the
dryer is not exhausted
to the outside, this lint is more
apt to accumulate
in and near the dryer, which could
create a fire hazard.
How to reduce
the possibility
of a fire hazard,
if
your dryer (Gas dryers must be exhausted
outside)
is not exhausted
to the outside:
• Clean the lint filter before every load. See How to
Operate
Your Dryer section.
• Inspect the area behind your front access
panel at least once a year and clean out any lint
that may have accumulated.
Wipe or vacuum,
being careful not to disturb any of the electrical
mechanical
connections.
How to remove the front access panel between the washer and dryer
\o
o/
Remove
two Phillips-head
screws at top of panel.
Lift access panel up until tabs at sides of panel slip
out of slots at sides of dryer.
To replace access panel, fit tabs on panel into
slots at sides of dryer, push panel back in place
and replace screws.
21
Advertisement
