1. Manuals
  2. Brands
  3. Canon Manuals
  4. Camcorder
  5. LEGRIA HFM307
  6. Instruction manual

Canon LEGRIA HFM36 Instruction Manual

Hd camcorder
Hide thumbs Also See for LEGRIA HFM36:
Table of Contents

Advertisement

Quick Links

PUB. DIE-0399-000
HD Camcorder

Instruction Manual

Advertisement

Table of Contents
loading

Related Manuals for Canon LEGRIA HFM36

Summary of Contents for Canon LEGRIA HFM36

  • Page 1: Instruction Manual

    PUB. DIE-0399-000 HD Camcorder Instruction Manual...

  • Page 2: Important Usage Instructions

    Introduction Important Usage Instructions WARNING! TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. WARNING! TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE.
  • Page 3 For more information about the recycling of this product, please contact your local city office, waste authority, approved scheme or your household waste disposal service or visit www.canon-europe.com/environment. (EEA: Norway, Iceland and Liechtenstein) Trademark Acknowledgements •...

  • Page 4: Exciting Features And New Functions

    (0 36). “Full HD 1080” refers to Canon camcorders compliant with high-definition video composed of 1,080 vertical pixels (scanning lines). Video is recorded at this resolution only when the recording mode is set to MXP or FXP mode.

  • Page 5: Image Stabilization

    Smart AUTO (0 40) Smart AUTO automatically selects the best scene mode for the scene you want to shoot. You get spectacular recordings every time without worrying about settings. Just point the camcorder and it will automatically select the best settings for your subject Video Snapshot (0 65)
  • Page 6 Enjoying your Recordings on Other Devices Connect the camcorder to an HDTV (0 120) AVCHD-compatible HDTVs and digital recorders with an SD memory card slot Play video directly from your recorded memory card Eye-Fi Save or upload to the Web. Use an Eye-Fi card (0 134) to wirelessly upload recordings to your computer or a video sharing Web site.

  • Page 8: Table Of Contents

    Table of contents  Introduction Exciting Features and New Functions About this Manual Getting to Know the Camcorder Supplied Accessories and CD-ROMs Names of Parts  Preparations Getting Started Charging the Battery Pack Preparing the Accessories Adjusting the Position and Brightness of the LCD Screen Basic Operation of the Camcorder Using the Touch Screen Operating Modes...
  • Page 9  Dual Shot Mode Basic Recording Shooting Video and Taking Photos in Dual Shot Mode About the Smart AUTO mode Zooming Quick Start Function  Video Basic Playback Playing Back the Video The Index Selection Screen: Selecting the Content to Play Back 3D Flip View Narrowing Down the Scenes Shown in the Index Screen...
  • Page 10 Using the Mini Advanced Shoe Using an External Microphone Using a Zoom Remote Controller Selecting the Playback Starting Point Playing Back Scenes Set to Background Music Onscreen Displays and Data Code Playlist and Scene Operations Editing the Playlist: Adding, Deleting, Moving and Playing Back Capturing Photos and Video Snapshot Scenes from a Movie...
  • Page 11  External Connections 116 Terminals on the Camcorder Connection Diagrams 120 Playback on a TV Screen 121 Saving and Sharing Your Recordings b Copying Recordings to a Memory Card Saving Recordings on a Computer b Saving Movies onto Standard-Definition Discs (DVD) Copying Recordings to an External Video Recorder b Uploading Movies to Video Sharing Web Sites...

  • Page 12: About This Manual

    About this Manual Thank you for purchasing the Canon LEGRIA HF M36 / LEGRIA HF M307. Please read this manual carefully before you use the cam- corder and retain it for future reference. Should your camcorder fail to operate correctly, refer to Troubleshooting (0 157).
  • Page 13 indicates that a function is available in the Brackets [ ]are used to refer to control operating mode indicated and indicates buttons and menu options you will that the function is not available. For a detailed touch on the screen and to other explanation refer to Operating Modes (0 27).

  • Page 14: Getting To Know The Camcorder

    Getting to Know the Camcorder Supplied Accessories and CD-ROMs The following accessories are supplied with the camcorder: CA-570 Compact Power Adapter (incl. power cord) BP-808 Battery Pack WL-D89 Wireless Controller (incl. CR2025 lithium button battery) STV-250N Stereo Video Cable Yellow • Red • White plugs CTC-100/S Component Cable Red •...
  • Page 15 The following CD-ROMs and software are supplied with the camcorder: • PIXELA Application - Disc 1 CD-ROM* and ‘PIXELA Applications’ Installation Guide - ImageMixer 3 SE Transfer Utilities – Software for saving and transferring movies and music files you can use as background music. •...

  • Page 16: Names Of Parts

    Names of Parts Left side view 1 DISP. (onscreen display) button (0 89)/ BATT. INFO button (0 156) 2 2 (camera/play) button (0 27) 3 Speaker (0 48) 4 Memory card slot cover 5 Memory card slot (0 35) 6 AV OUT terminal (0 116, 118)/ X (headphones) terminal (0 79) 7 BATTERY RELEASE switch (0 20) 8 ACCESS indicator (0 39, 55, 100)
  • Page 17 Top view A k Mini advanced shoe (0 81) A l Mode switch (0 27) S q PHOTO button (0 39, 100) S a Zoom lever (0 43) S s VIDEO SNAP (video snapshot) button (0 65) S d POWER button S f ON/OFF (CHG) (charge) indicator: Green –...
  • Page 18 Bottom view D a Serial number D s Tripod socket (0 174) Wireless Controller WL-D89 1 START/STOP button (0 39, 55) 2 b (index selection) button (0 49) Press and hold for more than 2 seconds to switch between shooting and playback mode.

  • Page 19: Getting Started

    Preparations This chapter describes basic operations, such as using the touch panel, navigating the menus, and first time settings to help you learn more about your camcorder. Getting Started Charging the Battery Pack The camcorder can be powered with a battery pack or directly using the compact power adapter.
  • Page 20 5 Charging will start when the ON/OFF (CHG) (charge) indicator camcorder is turned off. • If the camcorder was on, the green ON/OFF (CHG) indicator will go out when you turn off the camcorder. After a moment, the ON/OFF (CHG) indicator will start flashing in red (battery pack charging).
  • Page 21 • To prevent equipment breakdowns and excessive heating, do not con- nect the supplied compact power adapter to voltage converters for overseas travels or special power sources such as those on aircraft and ships, DC-AC inverters, etc. NOTES • The battery pack will be charged only when the camcorder is off. •...

  • Page 22: Preparing The Accessories

    Preparing the Accessories Wireless Controller First, insert the supplied CR2025 lithium button battery into the wire- less controller. 1 Press the tab in the direction of the arrow and pull out the battery holder. 2 Place the lithium button battery with the + side facing up.
  • Page 23 Grip Belt and Straps Fasten the grip belt. Adjust the grip belt so that you can reach the zoom lever with your index finger, and the g button with your thumb. To remove the grip belt 1 Lift the padded handgrip's flap and detach the strap from the Velcro pad.

  • Page 24: Adjusting The Position And Brightness Of The Lcd Screen

    To attach an optional wrist strap Pass the attaching end of the wrist strap through the rear bracket on the camcorder, thread the wrist strap through the loop and fasten. You can also attach the wrist strap to the strap mount on the grip belt to use both for extra convenience and protection.
  • Page 25 180° 180° 90° Subject can monitor the LCD screen NOTES • About the LCD screen: The screen is produced using extremely high-pre- cision manufacturing techniques, with more than 99.99% of the pixels operating to specification. Less than 0.01% of the pixels may occasion- ally misfire or appear as black, red, blue or green dots.

  • Page 26: Basic Operation Of The Camcorder

    Basic Operation of the Camcorder Using the Touch Screen The control buttons and menu items that appear on the touch screen change dynamically depending on the operating mode and the task you are performing. With the intuitive touch screen interface you have all the controls at your fingertips.

  • Page 27: Operating Modes

    • For details about how to take care of the touch screen, refer to Handling Precautions (0 173), Cleaning (0 178). Operating Modes Recording When recording video or photos, the camcorder’s operating mode is determined by the position of the mode switch and the onscreen con- trol buttons.

  • Page 28: Using The Menus

    Initial mode Operating mode Operation Press S in Playing back movies mode. ([Original] index screen) (0 46). Viewing photos Press S in mode. ([Photos] index screen) (0 96). NOTES • b When switching to a playback mode, the memory selected for playback will be the same currently used for recording.
  • Page 29 mode, touch [Edit] to display a similar panel contain- ing the various operations that are available after selecting one or more scenes or photos (for example, deleting, adding scenes to the playlist, protecting photos, etc.). Touch the control button of the desired opera- tion.
  • Page 30 NOTES • A small font size is used in menu screens so you can see the options currently selected. You can enlarge the font size by setting 6 [Font Size] to [A Large] but only the icons of the currently selected options will appear on the screen.

  • Page 31: First Time Settings

    First Time Settings Setting the Date and Time You will need to set the date and time of the camcorder before you can start using it. The [Date/Time] screen will appear automatically when the cam- corder’s clock is not set. When the [Date/Time] screen appears, the year will be selected.

  • Page 32: Changing The Language

    Changing the Language The default language of the camcorder is English. You can set it to one of 26 other languages. Operating modes: [Language a] [FUNC.]* [MENU] Desired language * Only when performing the procedure in a recording mode. NOTES •...

  • Page 33: Using A Memory Card

    Using a Memory Card Memory Cards Compatible for Use with the Camcorder You can use commercially available Secure Digital (SD) cards with this camcorder. However, depending on the memory card, you may not be able to record movies. Refer to the table below. As of May 2010, the movie recording function has been tested using SD/SDHC memory cards made by Panasonic, Toshiba and SanDisk, and SDXC memory cards made by Panasonic and Toshiba.
  • Page 34 SDXC Memory Cards As of May 2010, SDXC memory cards have been tested to work under Windows 7. For details on whether your computer's operating system is SDXC-compatible, check with your computer's manufacturer. IMPORTANT • If you use an SDXC memory card with a computer OS that is not SDXC- compatible, you may be prompted to format the memory card.

  • Page 35: Inserting And Removing A Memory Card

    Inserting and Removing a Memory Card Make sure to initialize (0 37) all memory cards before using them with this camcorder. 1 Turn off the camcorder. Make sure the indicator ON/OFF (CHG) is off. 2 Open the memory card slot cover. 3 Insert the memory card straight, with the label facing up, all the way into the memory card slot until it...

  • Page 36: Relay Recording Of Movies

    POINTS TO CHECK • Be sure you understand the information provided in Eye-Fi Cards (0 34) before using an Eye-Fi card. [FUNC.] [MENU] [Rec Media for Movies] or [Rec Media for Photos] [f] (built-in memory) or [g] (memory card)* * When selecting the memory, you can check the approximate available recording time/number of photos, based on currently used settings.

  • Page 37: Initializing The Built-In Memory (B Only) Or

    NOTES • Any of the following actions will deactivate the relay recording function: - Turning off the camcorder. - Opening the memory card slot cover. - Changing the position of the mode switch. - Changing the camcorder's operating mode. - Selecting the memory card as the memory for recording movies. Initializing the Built-in Memory (b only) or Memory Card Initialize memory cards when you use them with this camcorder for the first time.
  • Page 38 * Touch this option if you want to physically erase all the data rather than just clear the file allocation table of the memory. ** If you selected the [Complete Initialization] option, you can touch [Cancel] [OK] to cancel the initialization while it is in progress. All recordings will be erased and the memory can be used without any problem.

  • Page 39: Basic Recording

    Dual Shot Mode This chapter covers how to easily record video and photos in the all-automatic Dual Shot mode, and how to use basic shoot- ing functions like zoom and Quick Start. To enjoy full access to menus and more advanced functions, refer to the relevant chapters for video (0 55) and photos (0 100).

  • Page 40: About The Smart Auto Mode

    When you have finished recording 1 Make sure that the ACCESS indicator is off. 2 Turn off the camcorder. 3 Close the LCD panel. About Dual Shot • Only the following functions are available in mode. - Zoom (0 43). - Quick Start (0 44).
  • Page 41 Smart AUTO icons Background  Bright Blue skies Vivid colors Sunsets (color of the icon) (grey) (light blue) (green/red) (orange) Subject  People (stationary) — People (moving) — Subjects other than people, such as landscapes Close objects — The icon in parentheses appears under backlight conditions. Background ...
  • Page 42 • Be sure to save your recordings regularly (0 121), especially after making important recordings. Canon shall not be liable for any loss or corruption of data. • When recording photos on an Eye-Fi card, photos will be uploaded automatically if you are within the range of a configured network. Always verify that Eye-Fi cards have been approved in the country/region of use.

  • Page 43: Zooming

    Zooming Operating modes: There are three ways you can zoom in and out: using the zoom lever on the camcorder, using the zoom buttons on the wireless controller or using the zoom controls on the touch screen. In addition to the 15x optical zoom*, in mode, you can turn on the 300x digital zoom with the 7 [Digital Zoom] setting.

  • Page 44: Quick Start Function

    2 Touch the zoom controls to operate the zoom. Touch anywhere within the Q area to zoom out or anywhere within the P area to zoom in. Touch closer to the center for a slow zoom ([Speed 1]); touch closer to the e/d icons for faster zooms ([Speed 3]).
  • Page 45 2 When you wish to resume recording, open the LCD panel. The ON/OFF (CHG) indicator turns back green and the camcorder is ready to record. IMPORTANT • Do not disconnect the power source during standby mode (while the ON/OFF (CHG) indicator is lit in orange). NOTES •...

  • Page 46: Basic Playback

    Video This chapter covers functions related to movies, including play- back, advanced shooting, advanced functions and playlist and scene operations. For details about basic video shooting, refer to Dual Shot Mode (0 39). Basic Playback Playing Back the Video Operating modes: 1 Press S.
  • Page 47 A Memory being read B Index screen currently displayed C Drag your finger left for the next index page* D Drag your finger right for the previous index page* E Select a different index screen to read different content or from a different memory (b only) (0 49) F Scene's timeline (0 84) and recording information G Narrow down the scenes shown in the index screen...
  • Page 48 A Stop the playback. B Jump to the beginning of the scene. Double-tap to jump to the previous scene. C Pause the playback. D Drag your finger left and right along the volume bar to adjust the volume. E Touch anywhere else to hide the playback controls. F Fast playback backward*.

  • Page 49: The Index Selection Screen: Selecting The Content To Play

    IMPORTANT • Observe the following precautions while the ACCESS indicator is on or flashing. Failing to do so may result in permanent data loss. - Do not open the memory card slot cover. - Do not disconnect the power source or turn off the camcorder. - Do not change the camcorder’s operating mode.
  • Page 50 A b Touch the tab of the desired memory: built-in memory or memory card. B Touch a control button to select the content you want to play back. Options [Original] Original movies as you recorded them. [Playlist] Scenes that were added to the playlist (0 90) and may have been rearranged to your liking.

  • Page 51: D Flip View

    3D Flip View 3D Flip View is a fun way to display your video recordings (original scenes) in a 3D layout, organized by recording date. In any index screen, touch [b] [3D Flip View]. During single photo view, touch the screen once to display the controls then touch [Q] to open the [Photos] index screen.

  • Page 52: Narrowing Down The Scenes Shown In The Index Screen

    Narrowing Down the Scenes Shown in the Index Screen From the [Original] index screen, you can narrow down the scenes shown, leaving only scenes that were recorded on a specific date or only those scenes in which people's faces were detected. Operating modes: Showing Only Scenes that Contain People’s Faces This will narrow down the scenes shown in the [Original] index screen,...

  • Page 53: Deleting Scenes

    2 Open the calendar screen. [y All Scenes] [Scenes by Date] • Dates that contain scenes (that is, movies were recorded on that date) appear in black against a silver background. Dates without recordings appear grayed out. • Touch [y] or [A] to jump to the previous/next calendar month that contains recordings.
  • Page 54 • To select all the scenes at once: Touch [Select All] instead of touching individual scenes. (Remove in advance any checkmarks from scenes you may have selected individually.) 4 Delete the scenes. [Edit] [Delete] [Yes]* [OK] * Touch [Stop] to interrupt the operation while it is in progress. Some scenes may be deleted nevertheless.

  • Page 55: Advanced Functions

    - Do not disconnect the power source or turn off the camcorder. - Do not change the camcorder’s operating mode. • Be sure to save your recordings regularly (0 121), especially after making important recordings. Canon shall not be liable for any loss or corruption of data. ...

  • Page 56: Selecting The Video Quality (Recording Mode

    NOTES • The zoom, Quick Start function, power saving modes, etc. operate the same way in mode as in mode. For details, refer to Dual Shot Mode (0 39). Selecting the Video Quality (Recording Mode) The camcorder offers 5 recording modes. Changing the recording mode will change the recording time available on the memory.

  • Page 57: Special Scene Recording Programs

     Approximate recording times Default value Recording mode   Memory  4 GB 20 min. 30 min. 40 min. 1 hr. 1 hr. 10 min. 30 min. Memory card 8 GB Memory card/ 40 min. 1 hr. 1 hr. 2 hr.
  • Page 58 Sports] To record sports scenes such as tennis or golf. Night Scene] To record nightscapes with lower noise. Snow] To record in bright ski resorts without the subject being underexposed. Beach] To record on a sunny beach without the subject being underexposed. Sunset] To record sunsets in vibrant colors.
  • Page 59 Underwater] To record underwater scenes in natural colors. Surface] To record after getting out of the water, such as on a boat after diving. NOTES • [F Portrait]/[G Sports]/[I Snow]/[J Beach]: The picture may not appear smooth during playback. • [F Portrait]: The blur effect of the background increases the more you zoom in (P).

  • Page 60: Cinema Mode: Giving A Cinematic Look To Your

    - p will appear on the screen when the camcorder's temperature becomes too high. If this happens, turn off the camcorder, take it out of the waterproof case and keep it in a cool place until the temperature goes down. If the camcorder becomes too hot, it will turn off automatically.

  • Page 61: Advanced Image Stabilization

    Operating modes: To change the frame rate [FUNC.] [MENU] [Frame Rate] [D PF25] Advanced Image Stabilization The image stabilizer reduces camcorder blur (blur due to the cam- corder moving) so you can get nice, stable shots. Select the image sta- bilization mode according to the shooting conditions.

  • Page 62: Pre-Recording

    Powered IS When shooting video, you can use Powered IS to make the image stabilization even more powerful. Powered IS is most effective when you are stationary and zooming in on far subjects using high zoom ratios (the more you approach the telephoto end). Holding the LCD panel with your left hand will add to the stability of the shot.

  • Page 63: Face Detection

    1 Activate the pre-recording function. [FUNC.] [d Pre REC] [A On] • d appears. • Repeat, selecting [B Off], to turn off pre-recording. 2 Press g. The scene recorded in the memory will start 3 seconds before g was pressed. NOTES •...
  • Page 64 By default, face detection is activated. If the function was turned off, per- form the following procedure to turn it on. [FUNC.] [MENU] [A On o] [Face Detection & Tracking] To select the main subject If there is more than one person in the picture, the camcorder will auto- matically select one person it determines is the main subject.

  • Page 65: Touch & Track

    Touch & Track When recording people, face detection (0 63) will track the main sub- ject and keep it always in focus. But also when recording other moving subjects such as your pet, a moving vehicle or people not facing the camera directly, you can use Touch &...

  • Page 66: Digital Effects

    1 Press z. • A blue border appears on the screen. • Press z again to return to normal video recording mode. 2 Press • By default, the camcorder records for about 4 seconds (the blue frame serves as a visual progress bar) and then automatically returns to record pause mode.

  • Page 67: Manually Setting The Shutter Speed Or Aperture

    To fade in/out Press g in record pause mode (M) to start recording with a fade in. Press g while recording ( ) to fade out and pause the recording.  Options Default value)  Off] Select this setting when you do not intend to use the dig- ital effects.
  • Page 68 [FUNC.] [Rec. Programs] [B Shutter-Pri. AE] or [C Aperture-Pri. AE] Drag your finger left and right along the dial to set the desired shutter speed (B) or aperture value (C)  Options Default value)  [A Programmed AE] The camcorder automatically adjusts the aperture and shutter speed to obtain the optimal exposure for the subject.
  • Page 69 Shutter Speed and Aperture Value Guidelines With slower shutter speed you can add a nice motion blur and sense of movement. With faster shutter speeds you can “freeze the action” for powerful images of moving subjects. mode A mode 1/12 1/25 1/50 1/120...

  • Page 70: Manual Exposure Adjustment

    Manual Exposure Adjustment At times, backlit subjects may appear too dark (underexposed) or sub- jects under very strong lights may appear too bright or glaring (overex- posed). To correct this, you can adjust the exposure manually or use the Touch AE function to automatically set the optimal exposure for the subject you select.

  • Page 71: Automatic Gain Control (Agc) Limit

    NOTES • If the recording program is changed during exposure lock, the cam- corder will return to automatic exposure. • When shooting subjects with a strong light source behind them, the camcorder automatically corrects for the backlight. You can turn off the automatic backlight correction with the 7/8 [Auto Backlight Correction] setting.
  • Page 72 POINTS TO CHECK • Adjust the zoom before you start the procedure. 1 Open the manual focus screen. [FUNC.] [X Focus] 2 Touch a subject that appears inside the X frame. • The Touch AF mark (P) will flash and the focusing distance will be adjusted automatically.

  • Page 73: White Balance

    White Balance The white balance function helps you to accurately reproduce colors under different lighting conditions so that white objects will always look truly white in your recordings. Operating modes: POINTS TO CHECK • Select a recording program other than the Special Scene recording pro- grams.

  • Page 74: Image Effects

    NOTES • When you select the custom white balance: - Set 7 [Digital Zoom] to [B Off]. - Reset the white balance when you change locations or the lighting or other conditions change. - Depending on the light source, g may keep flashing. The result will still be better than with [Y Automatic].

  • Page 75: Mini Video Light

     Options Default value)  [U Off] Records with no image enhancing effects. [V Vivid] Emphasizes the contrast and color saturation. [W Neutral] Tones down the contrast and color saturation. [X Low Sharpening] Records subjects with softened outlines. [Y Soft Skin Detail] Softens the details in the skin tone area for a more complimentary appearance.
  • Page 76 NOTES • We recommend not using the mini video light while the optional Wide- converter or Tele-converter is attached; its shadow can appear on the screen. Using an External Video Light You can use the optional VL-5 Video Light or VFL-2 Video Flash Light when you need a video light that is stronger than the built-in mini video light.

  • Page 77: Self Timer

    Self Timer Operating modes: [FUNC.] [MENU] [Self Timer] [A On n] • appears. • Repeat, selecting [B Off], to turn off the self timer. mode: In record pause mode, press g. The camcorder starts recording after a 10-second countdown*. The countdown appears on the screen.

  • Page 78: Audio Recording Level

    Audio Recording Level You can adjust the audio recording level of the built-in or an external microphone. You can display the audio level indicator while recording. Operating modes: POINTS TO CHECK • Select a recording program other than [r Underwater] or [s Surface].

  • Page 79: Using Headphones

    To display the audio level indicator Usually, the audio level indicator will be displayed only after activating the manual adjustment of the audio recording level. You can choose to display it also when the audio level is adjusted automatically. [FUNC.] [c Mic.
  • Page 80 [FUNC.]* [MENU] [AV/Headphones] [Headphones] To close the menu: To continue adjusting the volume: [Volume] Drag your finger left and right along the volume bar to adjust the volume * Only when performing the procedure in mode. • J appears. To adjust the volume during playback mode, and in mode during slideshow playback, adjust the headphones volume the same way you adjust the speaker’s vol-...

  • Page 81: Using The Mini Advanced Shoe

    Using the Mini Advanced Shoe Using the mini advanced shoe, you can attach to the camcorder a range of optional accessories to expand its functionality. For details about optional accessories available for use with your camcorder, refer to Accessories (0 180). For details about how to attach and use the accessories, refer also to the instruction manual of the accessory used.
  • Page 82 Using the SM-V1 Surround Microphone or DM-100 Directional Stereo Microphone Using the SM-V1 you can add a sense of depth and presence to your recordings with 5.1ch surround sound. Using the DM-100 you can accurately record audio coming directly from the direction you are recording.

  • Page 83: Using A Zoom Remote Controller

    Using a Zoom Remote Controller By attaching the optional RA-V1 Remote Control Adapter to the mini advanced shoe, you can use the optional ZR-2000 or ZR-1000 Zoom Remote Controller. Doing so will allow you to use certain functions while viewing the picture on an external monitor without touching the camcorder.

  • Page 84: Selecting The Playback Starting Point

    Selecting the Playback Starting Point If you have a very long scene, you may want to start playing back the scene from a certain point. You can use the movie timeline to break the scene to segments at fixed time intervals ranging from 6 seconds to 6 minutes.
  • Page 85 A Touch twice to return to the index screen. B Previous/next scene. C Drag your finger left along the ruler to display the next 5 frames. D Current scene / Total number of scenes. E Scene's recording mode and length. F Recording date and time.

  • Page 86: Playing Back Scenes Set To Background Music

    Playing Back Scenes Set to Background Music You can play back video snapshot scenes, scenes in the playlist and photo slideshows set to background music (instead of the original sound) using one of the supplied music tracks. Operating modes: Using the Supplied Music Tracks as Background Music The supplied Camcorder Supplemental Disc contains 3 music tracks you can use as background music.
  • Page 87 A Select the desired music track. B Play back the original sound (no background music). C Delete the music track selected. D Listen to the music track selected. Touch again (B) to stop the playback. 3 Back in the index screen, touch a scene to start the playback set to the selected music track.
  • Page 88 NOTES • You can also add to the playlist just the video snapshot scenes you want to watch and arrange their playback order. • Initializing a memory card will permanently erase any music files you may have transferred from the supplied Camcorder Supplemental Disc to the card.

  • Page 89: Onscreen Displays And Data Code

    Onscreen Displays and Data Code You can turn most onscreen displays on or off. Operating modes: Repeatedly press h to turn the onscreen displays on/off in the following sequence: mode: • All displays on • Most displays off mode mode •...

  • Page 90: Playlist And Scene Operations

    Playlist and Scene Operations Editing the Playlist: Adding, Deleting, Moving and Playing Back Create a playlist to play back only the scenes you prefer and in the order of your choice. You can play back the scenes in the playlist using one of the supplied music tracks as background music (0 86).
  • Page 91 • b You can copy scenes from the built-in memory to the memory card (0 121) to include in the memory card’s playlist also scenes that were originally recorded in the built-in memory. Deleting Scenes from the Playlist Deleting scenes from the playlist will not affect your original recordings. 1 Open the [Playlist] index screen.

  • Page 92: Capturing Photos And Video Snapshot Scenes From A

    A Destination icon. B Move the scene to the position indicated by the destina- tion icon. C Touch an empty box to select it as the destination. D Scene selected to be moved. E Original position of the scene and currently selected des- tination.
  • Page 93 NOTES • A video snapshot scene can be captured only during playback; it can- not be captured during playback pause mode. • b The captured video snapshot scene is saved to the same mem- ory that contains the source scene. •...
  • Page 94 To capture the photos 1 Play back the scene from which you want to capture the photo. 2 Pause the playback at the point you want to capture. 3 Press j fully. To capture a photo sequence, hold j pressed down. The scene will be played back by frames and each frame captured as a separate photo.
  • Page 95 2 Select the scene you want to divide and touch it to start playing it back. 3 Pause the playback at the point where you want to divide the scene. 4 Open the scene division screen. [Edit] [Divide] 5 Bring the scene to a precise point, if necessary. •...

  • Page 96: Viewing Photos

    Photos Refer to this chapter for details on taking photos (advanced shooting functions), viewing photos and printing them. For details about basic photo shooting, refer to Dual Shot Mode (0 39). Basic Playback Viewing Photos Operating modes: 1 Press S. 2 Open the [Photos] index screen, if it is not displayed.
  • Page 97 A Memory being read. B Index screen currently displayed. C Drag your finger left for the next index page. D Drag your finger right for the previous index page. E Select a different index screen to read different content or from a different memory (b only) (0 49).

  • Page 98: Deleting Photos

    IMPORTANT • Observe the following precautions while the ACCESS indicator is on or flashing. Failing to do so may result in permanent data loss. - Do not open the memory card slot cover. - Do not disconnect the power source or turn off the camcorder. - Do not change the camcorder’s operating mode.
  • Page 99 3 Touch on the individual photos you want to delete. • A checkmark O will appear on photos selected. Touch a selected photo again to remove the checkmark. • To select all the photos at once: Touch [Select All] instead of touching individual photos.

  • Page 100: Taking Photos In Y Manual Mode

    Additional Functions Taking Photos in y Manual Mode Operating modes: 1 Set the mode switch to y. 2 Turn on the camcorder. • b By default, photos are recorded in the built-in memory. You can select the memory that will be used to record photos (0 35).

  • Page 101: Selecting Photo Size And Quality

    NOTES • If the subject is not suitable for autofocus, h turns yellow. Adjust the focus manually (0 71). • When the subject is too bright, [Overexp.] will flash on the screen. In such case, use the optional FS-H37U ND filter. Deleting a Photo Right After Recording It You can delete a photo you have just recorded while reviewing it within the time set for the 8...
  • Page 102 Options Large capacity memory cards, like those usually used for video record- ing, can contain a very large number of photos. As a reference, the number of photos that can be recorded on a 1 GB memory card is given in the following table. NOTES •...

  • Page 103: Flash

    Flash You can use the flash to take photos in dark places. Operating modes: POINTS TO CHECK • Select a recording program other than [M Fireworks], [r Underwater] or [s Surface]. 1 Select the flash mode. [FUNC.] [S Flash] Desired option •...

  • Page 104: Drive Mode: Continuous Shooting And Exposure

    appears when you turn on the video flash light (n ON). For details about using the video flash light, refer to the instruction manual of the VFL-2. NOTES • The flash will not fire in the following cases: - When the flash mode is set to [U Automatic] or [V Red-Eye Auto] and you manually adjust the exposure.
  • Page 105 Operating modes: POINTS TO CHECK • Select a recording program other than [M Fireworks]. [FUNC.] [Drive Mode] Desired option  Options Default value)  [A Single] Records a single photo. [D AE Bracketing] The camcorder records 3 photos using 3 dif- ferent exposures (dark, normal, light in 1/2 EV steps), allowing you to choose the photo you like the best.
  • Page 106 Taking Photos while Recording Movies (Simultaneous Recording) You can record photos even while the camcorder is set to mode. Moreover, you can capture the photo at the same time you are record- ing video. Photos recorded with simultaneous recording will have the same aspect ratio of movies (16:9).

  • Page 107: Light Metering Mode

    • b Photos will be recorded on the memory selected for recording photos. • Photos cannot be recorded simultaneously while the digital zoom or a digital effect is activated. • In mode, when the IS mode is set to [P Dynamic], if you zoom in to full telephoto you can record video using a zoom ratio larger than 15x.

  • Page 108: Slideshow

    Slideshow You can play a slideshow of all the photos and even set it to music. Operating modes: 1 Open the [Photos] index screen. 2 Select the background music to use when playing back the photo slideshow (0 86). 3 Touch the screen to display the playback controls, then touch [A] to play back the slideshow set to the selected music track.

  • Page 109: Rotating Photos

    Rotating Photos You can rotate photos 90 degrees to change their orientation. Operating modes: 1 In single photo view, select the photo you want to rotate. 2 Touch the screen to display the playback controls. 3 Rotate the photo. [Edit] [Rotate] [q] (90°...

  • Page 110: Protecting Photos

    Protecting Photos You can protect photos from accidental erasure. Operating modes: Protecting Single Photos 1 In single photo view, select the photo you want to protect. 2 Touch the screen to display the playback controls. 3 Protect the photo. [Edit] [Protect] •...
  • Page 111 IMPORTANT • Initializing the memory will permanently erase all recordings, including protected photos. r Functions You Can Use when Taking Photos You can also use the following functions... The following functions and features of the camcorder can be used either for shooting video or for taking photos. The way to set and use them was already explained in detail, so we refer you to the relevant page in the “Video”...

  • Page 112: Printing Photos

    You can mark in advance the photos you want to print and set the desired number of copies as a print order (0 114). Canon printers: SELPHY printers of the CP, DS and ES series and inkjet printers carry- ing the PictBridge logo.
  • Page 113 • For best performance when connecting the camcorder to a PictBridge- compatible printer, we recommend keeping the number of photos in the memory to no more than 100 photos. Printing a Single Photo With the camcorder correctly connected to the printer and the photo you want to print displayed in single photo view: [Yes] •...

  • Page 114: Print Orders

    If that option is not available, touch [Stop] and then restart printing from the beginning. • Other printers or if the error still persists with a Canon printer: If printing does not resume automatically, disconnect the USB cable and turn off the camcorder.
  • Page 115 • To cancel the print order, set the number of copies to 0. 4 Drag your finger left/right to select another photo to mark with a print order or touch [a]. Setting Print Orders from the Index Screen 1 Open the [Photos] index screen. Check that you have selected the g tab (memory card).

  • Page 116: Terminals On The Camcorder

    External Connections This chapter explains how to connect your camcorder to an external device such as a TV, VCR, or computer. Terminals on the Camcorder COMPONENT OUT Terminal* Access: Open the rear terminal cover. The component video terminal is for video only. When you use connection B do not forget the audio connections using the AV OUT/X terminal.

  • Page 117: Connection Diagrams

    Connection Diagrams In the following connection diagrams, the left side shows the terminals on the camcorder and the right side shows (for reference only) an example of terminals on a connected device. Connection A HDMI Type: Digital Quality: High definition Output only Connect to a high-definition TV (HDTV) with an HDMI input terminal.

  • Page 118: External Connections

    Connection B Component Video Type: Analog Quality: High Definition Output only Connect to a high-definition TV (HDTV) with component video input terminals. Change the following settings on the camcorder: [AV/Headphones] to [H AV] Blue CTC-100/S Component Cable Green (supplied) White STV-250N Stereo Video Cable (supplied) Connection C...
  • Page 119 Connection c Composite Video (SCART) In all respects, exactly the same connection as connection C. Connect to a standard TV or VCR with SCART input terminal. Requires a SCART adapter (commercially available). White Yellow STV-250N Stereo Video Cable SCART adapter (supplied) (commercially available) Connection D...

  • Page 120: Playback On A Tv Screen

    Playback on a TV Screen Connect the camcorder to a TV to enjoy your recordings with family and friends. Playback on an HDTV using one of the high-definition con- nections will ensure the best playback quality. Operating modes: 1 Turn off the camcorder and the TV. 2 Connect the camcorder to the TV.

  • Page 121: Saving And Sharing Your Recordings

    Saving and Sharing Your Recordings b Copying Recordings to a Memory Card You can copy your recordings only one-way: from the built-in memory to the memory card. Scenes and photos will be copied from the index screen you selected to the corresponding index screen on the memory card.
  • Page 122 Copying a Single Photo Operating modes: 1 In single photo view, select the photo you want to copy. Check that you are viewing photos recorded in the built-in memory. (f appears next to the photo number.) 2 Touch the screen to display the playback controls. 3 Copy the photo.
  • Page 123 IMPORTANT • Observe the following precautions while the ACCESS indicator is on or flashing. Failing to do so may result in permanent data loss. - Do not open the memory card slot cover. - Do not disconnect the power source or turn off the camcorder. - Do not change the camcorder’s operating mode.
  • Page 124 Using the software See ‘ImageMixer 3 SE Software Guide’ (PDF file on the Transfer Utili- ties CD-ROM). Saving Photos With the supplied software Photo Application you can save photos to your computer, and easily organize and edit them. Installation Install the software before you connect the camcorder to the computer for the first time.
  • Page 125 IMPORTANT • When the camcorder is connected to a computer: Do not open the memory card slot cover and do not remove the memory card. • Operation may not work correctly depending on the software and the specifications/settings of your computer. •...
  • Page 126 b Saving Movies onto Standard-Definition Discs (DVD) You can convert your high-definition video recordings into standard definition in the camcorder and then use the supplied software Image- Mixer 3 SE to save the converted scenes and burn them onto standard DVDs in your computer.
  • Page 127 • To select all the scenes at once: Touch [Select All] instead of touching individual scenes. (Remove in advance any checkmarks from scenes you may have selected individually.) 6 Touch [Edit] [Convert HDUSD (x DVD)] to open the HDUSD conversion screen. •...
  • Page 128 • The time required to convert scenes is approximately equal to the total playback time of the converted scenes. In most cases this is still faster than converting the scenes in the computer so we recommend you convert scenes in the camcorder. Connecting to the Computer and Creating DVD Discs 1 Power the camcorder using the compact power adapter.

  • Page 129: Copying Recordings To An External Video Recorder

    Copying Recordings to an External Video Recorder In High Definition Connect the camcorder to AVCHD-compatible digital video recorders to make perfect copies of your movies in high definition. If the external digital video recorder has an SD memory card slot, you can use the memory card to copy your movies without connecting the camcorder.

  • Page 130: B Uploading Movies To Video Sharing Web Sites

    NOTES • We recommend powering the camcorder using the compact power adapter. b Uploading Movies to Video Sharing Web Sites You can convert your high-definition video recordings into standard definition in order to upload them to your favorite video sharing Web site.
  • Page 131 Converting Scenes into Standard Definition 1 Power the camcorder using the compact power adapter. 2 Make sure there is a memory card in the camcorder with sufficient available space. 3 Open the [Original], [Playlist] or [Video Snapshot]  [Original]/ [Playlist] index screen. •...
  • Page 132 To embed the recording date and time The recording date and time will always be displayed on the converted scene. [Embed Date/Time] [On] To select the bit rate Using a higher bit rate will result in better video quality for the con- verted scenes, while a lower bit rate will result in smaller file sizes and faster uploads.
  • Page 133 Connecting to the Computer and Uploading your Videos If you are connecting the camcorder to the computer immediately after the conversion described in the previous section, start this procedure from step 3 below. Otherwise, start this procedure from the beginning. 1 Power the camcorder using the compact power adapter.
  • Page 134 Uploading your Videos Wirelessly If you are using an Eye-Fi card, you can automatically upload the mov- ies from the [For Web Upload] index screen to your favorite video shar- ing Web site. You will need to have installed the software supplied with your Eye-Fi card and completed all the required configuration setup in advance.
  • Page 135 NOTES • Depending on the amount of data to be uploaded and the network's wireless connection conditions, it can take some time to upload video files. If the wireless connection is too weak, the wireless upload may fail and the video files will be registered as incomplete uploads. •...

  • Page 136: Appendix: Menu Options Lists

    Additional Information This chapter contains troubleshooting advice, screen mes- sages, handling and maintenance tips, and other information. Appendix: Menu Options Lists Menu items not available appear grayed out. For details about how to select an item, refer to Using the Menus (0 28). For details about each function, see the reference page.
  • Page 137 4 3 0 Control Button Setting options/Function  [S Flash] [U Automatic], [V Red-Eye Auto], – [S Flash On], [W Flash Off]   [X Focus] [2] (manual focus): Toggle on (x) or off (w), Touch AF frame   [e Exposure] [y] (manual exposure): Toggle on (x) or off (w), Touch AE frame...
  • Page 138 Setup Menus [Edit] Panel - Mode 1: Original scenes s: Playlist scenes (including the playlist only of video snapshot scenes) Z: Original video snapshot scenes u: SD scenes on the memory card (b only) 1 s Z u 0 Control Button Target Scenes/Function ...
  • Page 139 [Edit] Panel - Mode Single Photo View Control Button Index Screen  [Selected Photos], [Copy ( [All Photos]  [Delete]  [Protect]  [Print Orders]  [Rotate] –  Additional Information...

  • Page 140: Setup Menus

    Setup Menus 7 / 8 Camera Setup 4 3 0 Menu item Setting options  [Digital Zoom] [B Off], [G 60x], [H 300x] – –   [Zoom Speed] [I Variable], [J Speed 3], [K Speed 2], [L Speed 1] ...
  • Page 141 [Digital Zoom]: Determines the Optical zoom Digital zoom operation of the digital zoom. The color of the indicator indi- cates the zoom. • When activated, the cam- corder will switch automatically to digital zoom when you zoom White Light Dark in beyond the optical zoom blue blue...
  • Page 142 • Using focus assistance will not affect the recordings. It will be cancelled automatically after 4 seconds or when you start recording. [Auto Slow Shutter]: The camcorder automatically uses slow shutter speeds to obtain brighter recordings in places with insufficient lighting. •...
  • Page 143 [Onscreen Markers]: You can display a grid or a horizontal line at the cen- ter of the screen. Use the markers as a reference to make sure your sub- ject is framed correctly (vertically and/or horizontally). • Using the onscreen markers will not affect the recordings. [POWERED IS Button]: Determines the operation mode of the POWERED IS button.
  • Page 144 Menu item Setting options  [Photo Quality/Size] [K 2304x1296], – – – [L 2100x1575], [M 1600x1200], [N 640x480] [E Super Fine], [F Fine], [G Normal]  [Photo Capture from [A Single Photo], – – – Video] [B Photo Sequence]  [Photo Capture [P Super Fine / 1920x1080], –...
  • Page 145 • In the information screen of a memory card you can also check its Speed Class. • The [Total space] shown for the built-in memory indicates actually usable space. It may be slightly smaller than the nominal built-in mem- ory capacity listed in the Specifications. [x.v.Colour]: Uses a color space with an extended gamut to achieve deeper colors, closer to real life.

  • Page 146: System Setup

    y / z Playback Setup Menu item Setting options   [Select Music] [B Off], [A On] When [A On] - list of music tracks  [Data Code] [I Date], [J Time], [K Date and Time], – – [L Camera Data] ...
  • Page 147 Menu item Setting options     [Language a] ], [Dansk], [Deutsch], ], [English], [Español], [Français], [Italiano], [Magyar], [Melayu], [Nederlands], [Norsk], [Polski], [Português], [ [Suomi], [Svenska], [Türkçe], ], [ ], [ ], [ ], [ ], [   ...
  • Page 148 Menu item Setting options     [Time Zone/DST] [S] (home time zone) or [V] (travel time zone): [Paris], list of world time zones [U] (DST adjustment)     [Date/Time] [Date/Time]: – [Date Format]: [Y.M.D], [M.D,Y], [D.M.Y] (Y- year, M- month, D- day) [24H]: Toggle On (x, 24-hour clock) or Off (w, 12-hour clock)
  • Page 149 [LCD Brightness]: Adjusts the brightness of the LCD screen. • Changing the brightness of the LCD screen does not affect the bright- ness of your recordings or the brightness of the playback image on a [LCD Screen Dimmer]: When set to [ On], the LCD screen is dimmed.
  • Page 150 [Calendar Start Day]: Select the day on which the week in the calendar screen (0 52). [Battery Info]: Displays a screen where you can verify the battery charge (as a percentage) and the remaining recording time ( mode) or playback time ( mode).
  • Page 151 [Reset All]: Resets all the camcorder's settings to default values. [Firmware]: You can verify the current version of the camcorder's firm- ware. This menu option is usually unavailable.  Additional Information...

  • Page 152: Appendix: Onscreen Icons And Displays

    Appendix: Onscreen Icons and Displays Recording Movies (in Dual Shot mode) 7 Zoom (0 43) 1 Smart AUTO mode (0 40) 8 Recording mode (0 56) 2 Onscreen zoom controls (0 43) 9 Control button: Start/Stop video 3 Operating mode (0 27) recording 4 In record pause mode: A q Face detection frame (0 63)
  • Page 153 Recording Movies (in y Manual mode) S g x.v.Colour (0 145) A s Control button: Open the FUNC. S h Face detection (0 63) panel (0 28) S j Photo quality/size A d Recording program (0 57, 60, 67) (simultaneous recording) (0 106) A f R Instant AF (0 141), S k Wind screen off (0 142) MF Manual focus (0 71)
  • Page 154 Recording Photos (in y Manual mode) F g Photo quality/size (0 101) D k Drive mode (0 104) F h Control button: Switch to movie D l Light metering mode (0 107) recording (0 55) F q Control button: Last function used F j AF frame (0 141) ([MENU] in this case) F k Focus and exposure lock...
  • Page 155 Viewing Photos Exif information panel H s Control button: Open the Edit panel G f Control button: Open the setup (0 139) menus (0 140) H d Control button: Switch to [Photos] G g Protected photo mark (0 110) index screen (0 96) G h Current photo / Total number of H f Manual focus (0 71) photos...

  • Page 156: Memory Operation

    5 Memory operation N Record, M Record pause, A Playback, C Playback pause, I Fast playback, J Fast reverse playback, G Slow playback, H Slow reverse playback, E Frame advance, F Frame reverse. 6 Remaining battery time • The icon shows a rough estimate of 100% the remaining charge as a percentage of the full charge of the...

  • Page 157: Trouble

    - please read the “CHECK THIS FIRST” box before going on to the more detailed problems and solutions. Consult your dealer or a Canon Service Center if the problem persists. CHECK THIS FIRST Power supply •...
  • Page 158 - The camcorder cannot communicate with the battery pack attached. Such battery packs can- not be charged using this camcorder. A noise can be heard from the compact power adapter. - A faint sound can be heard while the compact power adapter is connected to a power outlet. This is not a malfunction.
  • Page 159 - The camcorder may become hot after using it continuously for long periods of time; this is not a malfunction. If the camcorder becomes unusually hot or it becomes hot after using it only for a short while, it may indicate a problem with the camcorder. Consult a Canon Service Cen- ter.
  • Page 160 - The camcorder has malfunctioned. Consult a Canon Service Center. Even after stopping recording, the ACCESS indicator does not go off. - The scene is being recorded in the memory. This is not a malfunction.
  • Page 161 The red ON/OFF (CHG) indicator flashes very slowly ( one flash at 2- second intervals). - The temperature of the battery pack is outside the charging range. If the battery pack’s tem- perature is below 0 °C, warm it before charging it; if it is above 40 °C, let the battery pack cool down before charging it.
  • Page 162 Sound is distorted or is recorded at lower levels. - When recording near loud sounds (such as fireworks, shows or concerts), sound may become distorted or it may not be recorded at the actual levels. Activate the microphone attenuator (0 142) or adjust the audio recording level manually (0 78). The picture is displayed correctly but there is no sound from the built-in speaker.
  • Page 163 Connections with External Devices Video noise appears on the TV screen. - When using the camcorder in a room where a TV is located, keep a distance between the compact power adapter and the power or antenna cables of the TV. Playback looks fine on the camcorder but there is no image on the TV screen.

  • Page 164: List Of Messages

    Cannot communicate with the battery pack. Continue using this battery pack? - You attached a battery pack that is not recommended by Canon for use with this camcorder. - If you are using a battery pack recommended by Canon for use with this camcorder, there may be a problem with the camcorder or battery pack.
  • Page 165 Cannot play back - There is a problem with the memory. If this message appears often without apparent reason, contact a Canon Service Center. b Cannot play back Cannot access the built-in memory - There is a problem with the built-in memory. Save your recordings (0 123) and initialize the built-in memory using the [Complete Initialization] option (0 37).
  • Page 166 - There is a problem with the memory. If this message appears often without apparent reason, contact a Canon Service Center. b Cannot record Cannot access the built-in memory - There is a problem with the built-in memory.
  • Page 167 - If after the message disappears, appears in red, perform the following: Turn off the cam- corder and remove and reinsert the memory card. If turns back to green you can resume recording/playback. If the problem persists, save your recordings (0 123) and initialize the memory card (0 37).
  • Page 168 Mem. Card Unable to recognize the data - The memory card contains scenes recorded in a different television system (NTSC). Play back the recordings in the memory card with the device originally used to record them. Memory card cover is open - After inserting a memory card, close the memory card slot cover (0 35).
  • Page 169 The lens cover is not fully open. Turn the camcorder off, then on again. - The lens cover did not open fully. Turn the camcorder off, then on again. If this does not solve the problem, consult a Canon Service Center. This memory card contains scenes. Delete all scenes to use relay recording.

  • Page 170: Direct Print Related Messages

    This photo cannot be displayed - You may not be able to display photos taken with other devices or image files created or edited on a computer and then transferred to a memory card connected to the computer. This B photo could not be deleted - Protected photos (B) cannot be deleted.
  • Page 171 - Check the printer status. - Ink tank errors have occurred. Replace the ink tank. Ink absorber full - Touch [Continue] to resume printing. Consult a Canon Service Center (refer to the list included with the printer) to replace the ink absorber. Ink error - The ink level cannot be detected correctly or the ink cartridge is out of ink.
  • Page 172 USB cable. Check the printer status. NOTES About Canon Inkjet/SELPHY DS Printers: If the printer’s error indicator flashes or an error message appears on the printer’s operation panel, refer to the printer’s instruction manual.

  • Page 173: Handling Precautions

    (0 121) and save them on a regular basis. This will protect your impor- tant recordings in case of damage and create more free space on the memory. Canon shall not be liable for any data loss. • Do not carry the camcorder by the LCD panel. Be careful when closing the LCD panel.
  • Page 174 • When mounting the camcorder on a 5.5 mm tripod, make sure that the tripod's fas- tening screw is shorter than 5.5 mm. Using other tripods may damage the camcorder. • When recording movies, try to get a calm, stable picture. Excessive cam- corder movement while shooting and extensive use of fast zooms and panning can result in jittery scenes.
  • Page 175 Regarding the use of non-Canon battery packs • For your safety, battery packs that are not genuine Canon battery packs will not be charged even if you attach them to this camcorder or to the optional CG-800E Battery Charger.
  • Page 176 • Secure Digital (SD) memory cards have a physical switch to prevent writ- ing on the card so as to avoid the accidental erasure of the card's con- tent. To write-protect the memory card set the switch to the LOCK position. LOCK switch Built-in Rechargeable Lithium Battery The camcorder has a built-in rechargeable lithium battery to keep the...
  • Page 177 Disposal When you delete movies or initialize the memory, only the file allocation table is altered and stored data is not physically erased. Take the nec- essary precautions when you dispose of the camcorder or memory card, for example by physically damaging it to prevent the leakage of private data.

  • Page 178: Maintenance/Others

    Maintenance/Others Cleaning Camcorder Body • Use a soft, dry cloth to clean the camcorder body. Never use chemically treated cloths or volatile solvents such as paint thinner. Lens and Instant AF Sensor • If the lens surface or Instant AF sensor is dirty, autofocus may not work properly.

  • Page 179: Using The Camcorder Abroad

    You can use the compact power adapter to operate the camcorder and to charge battery packs in any country with power supply between 100 and 240 V AC, 50/60 Hz. Consult a Canon Service Center for information on plug adapters for overseas use.

  • Page 180: General Information

    General Information Accessories (Availability differs from area to area) D PictBridge- compatible printers Card reader/writer Computer TV/HDTV VCR/DVD recorder SCART Adapter Optional accessories not listed below are described in more detail in the following pages. SS-600/SS-650 Shoulder Strap IFC-300PCU USB Cable WS-20 Wrist Strap Memory card WL-D89 Wireless Controller...

  • Page 181: Optional Accessories

    Use of genuine Canon accessories is recommended. This product is designed to achieve excellent performance when used with genuine Canon accessories. Canon shall not be liable for any dam- age to this product and/or accidents such as fire, etc., caused by the malfunction of non-genuine Canon accessories (e.g., a leakage and/or...
  • Page 182 Charging Times The charging times given in the following table are approximate and vary according to charging conditions and initial charge of the battery pack. Battery pack BP-808 BP-819 BP-827 BP-809 Charging conditions Using the camcorder 150 min. 260 min. 385 min.
  • Page 183 Using a memory card Recording mode Battery pack Usage time Recording (maximum) 100 min. 105 min. 105 min. 105 min. 105 min. BP-808 Recording (typical)* 65 min. 65 min. 65 min. 70 min. 70 min. BP-809 Playback 165 min. 165 min. 170 min. 170 min. 170 min. Recording (maximum) 205 min.
  • Page 184 9 FS-H37U Filter Set Neutral density and MC protector filters help you to control difficult lighting condi- tions. A q SC-2000 Soft Carrying Case A handy camcorder bag with padded compartments and plenty of space for accessories. A a SM-V1 Surround Microphone Use 5.1ch surround sound to add a sense of presence to your movies.
  • Page 185 This case allows you to record movies and take photos underwater without get- ting the camcorder wet. This mark identifies genuine Canon video accessories. When you use Canon video equipment, we recommend Canon-brand accessories or products bearing the same mark.

  • Page 186: Specifications

    Specifications LEGRIA HF M36 / LEGRIA HF M307 System • Recording System Movies: AVCHD Video compression: MPEG-4 AVC/H.264; Audio compression: Dolby Digital 2ch; Dolby Digital 5.1ch* * Only when using the optional SM-V1 Surround Microphone. Photos: DCF (Design rule for Camera File system), compatible with Exif* Ver. 2.2 and with DPOF Image compression: JPEG (Super Fine, Fine, Normal) * This camcorder supports Exif 2.2 (also called “Exif Print”).
  • Page 187 • Lens f=4.1-61.5 mm, F/1.8-3.2, 15x optical zoom 35 mm equivalent: Movies: [Dynamic] IS mode: 39.5 – 711 mm Other IS modes: 39.5 – 592.5 mm Photos: 39.5 – 592.5 mm • Lens Configuration: 11 elements in 9 groups (1 double-sided aspheric element) •...
  • Page 188 Power/Others • Power supply (rated) 7.4 V DC (battery pack), 8.4 V DC (compact power adapter) • Power consumption: 3.3 W (SP mode, AF on, LCD normal brightness) • Operating temperature: 0 – 40 °C • Dimensions [W x H x D] (excluding the grip belt): 68 x 60 x 123 mm •...
  • Page 189 Audio sampling: 48 kHz, 16 bits, 2 channels Minimum length: 1 second File extension: WAV The music data is saved in the memory under the following folder structure. b In the built-in memory: CANON MY_MUSIC MUSIC_01.WAV to MUSIC_99.WAV On the memory card: CANON PRIVATE MY_MUSIC MUSIC_01.WAV to MUSIC_99.WAV...

  • Page 190: Index

    Index ..104 Continuous shooting ... . .60 25p Cinema Mode Copying* ....51 3D Flip View .
  • Page 191 ....101 Photo size Playback ....74 Image effects .
  • Page 192 ... . .29, 140 Setup menus ....67 Shutter speed . . 59 Underwater (recording program) .
  • Page 193 Canon UK Ltd CCI Service Centre, Unit 130 Centennial Park, Borehamwood, Hertfordshire, WD6 3SE, United Kingdom Telephone 0870-241-2161 Canon Australia Pty Ltd Tel: 13-13-83 (within Australia only) (61) 02-9805-2555 www.canon.com.au Canon New Zealand Ltd Tel: 0800-222-666 (within New Zealand only) (64) 09-489-0300 www.canon.co.nz...

This manual is also suitable for:

Legria hf m31Legria hf m300Legria hf m306

Table of Contents