Panasonic AG-CPDIOCRUP Operating Instructions Manual page 27

Factory default settings
(Camera related settings)
1 ZOOM-LIM
Target Magnification
2 AUTO ZOOM
Target Magnification
3 AUTO ZOOM
Maintenance Time
4 Back Light
5 Camera LED
6 Flip
(continued)
22 Maximum zoom factor
Setting values: 22 - 220
(The values except 22 are multiples of 20.)
(Values from 1 to 22 are integers, and values
of 40 and above are multiples of 20.)
10 Target zoom factor when AutoZoom command is received
Setting values: 1 - 22 (integers)
3 Interval of maintaining target zoom
factor when AutoZoom command is received
Setting values: 0 - 9 (integers)
OFF Backlight compensation enable/disable
Setting values:
ON Camera REC LED enable/disable
Setting values:
OFF Camera output image top/bottom flip enable/disable
Setting values:
1 - 220
ON (Backlight compensation enabled)
OFF (Backlight compensation disabled)
ON (Camera REC LED lights up during recording)
OFF (Camera REC LED is always off)
ON (Top/bottom flip enabled)
OFF (Top/bottom flip disabled)
27