Machine Settings - Canon PIXMA MX320 Manual

Machine Settings

> > Machine Settings
Contents Other Usages
Machine Settings
This section describes the items you can set or change with each setting menu. For details on setting or
changing, refer to the on-screen manual:
For information on the items you can set or change in the Fax settings menu, see
,
Items Settings for Sending Faxes
Print settings
Prevent abrasion
Use this setting only if the print surface becomes smudged.
Extended copy amt.
Selects the amount of image that extends off the paper when making borderless copies.
Advanced settings
Audible tones
Adjusts the beep volume when pressing the buttons on the Operation Panel, or the alarm volume.
Country select
Selects the country where you are using the machine.
Note
This setting may not be available depending on the country or region of purchase.
Language selection
Changes the language for LCD messages and menus.
Quiet mode
Enables this function if you want to reduce the operating noise of the machine, such as when using
the machine at night (when copying, printing from the PictBridge compliant device, printing with
wireless communication, etc.).
Key repeat
Enables to increase or decrease numbers rapidly by pressing and holding down the button when
inputting numbers. When this setting is disabled, holding down the button is the same as pressing
it once.
Mobile phone settings
Specifies paper, layout, etc. when you print from the wireless communication device. This setting
appears only when the optional Bluetooth Unit is connected to the machine.
Bluetooth settings
Changes the Bluetooth settings, such as the device name or passkey. This setting appears only
when the optional Bluetooth Unit is connected to the machine.
PictBridge settings
Specifies paper, print quality, etc. when you print from the PictBridge compliant device.
.
Advanced Guide
, or
Settings for Receiving Faxes
Advanced Guide Troubleshooting
Other Basic Setting
.
Page 80 of 817 pages