Canon PIXMA MX320 Manual page 742

Document Jams in the ADF
Note
The document may not feed properly depending on the media type, or your environment,
such as when the temperature and humidity are either too high or too low.
In this case, reduce the number of document pages to approximately half of the loading
capacity.
If the document still jams, use the Platen Glass instead.
Removing the jammed document from the Document Output Slot:
If the document is jammed in the Document Output Slot, open the Document Output Slot as
shown in the figure below and pull out the document.
When rescanning the document after clearing the error, rescan it from the first page.
If you cannot remove the document or the document tears inside the machine, or if the document
jam error continues after removing the document, contact the service center.
Page 742 of 817 pages
Page top