Entering The Date And Time - Canon PIXMA MX320 Manual

Entering the Date and Time

> Setting Up the Machine
Contents
Entering the Date and Time
Note
Three date display formats are available: YYYY/MM/DD, MM/DD/YYYY, and DD/MM/YYYY.
For details, refer to the on-screen manual:
When the machine is connected to a computer with the MP Drivers installed, the date and time
setting will be copied from the computer to the machine. As long as the date and time is set
accurately on your computer, you do not need to set it on the machine.
If you disconnect the power plug or when there is a power failure, the date and time setting on the
machine will be reset. When you connect the machine to a computer with the MP Drivers installed,
the setting will be copied to the machine once again.
1.
Display the Date/time setting screen.
Press the FAX button, and press the Menu button.
(1)
The Fax settings menu will appear.
Use the
(2) (-) or
The User settings menu will appear.
Use the
(3) (-) or
button.
2.
Enter the date and time.
Use the Numeric buttons to enter the date and time (in 24-hour format).
(1)
Enter only the last two digits of the year.
Note
If you misentered the date and time, press the
under the number to enter the correct number.
Press the OK button.
(2)
3.
Return to the fax standby screen.
Press the FAX button.
(1)
>
Specifying the Basic Settings for the Machine
Advanced Guide .
(+) button to select User settings, and press the OK button.
(+) button to select Date/time setting, and press the OK
(-) or
Advanced Guide Troubleshooting
> Entering the Date and Time
(+) button to move the cursor
Page 26 of 817 pages
Page top