Basic - Panasonic AJ-HPM200 Operating Instructions Manual

BASIC

This menu sets buttons available on the key panel in REMOTE mode, switches display of the CTL counter display between 12
and 24-hour clock display, sets superimposed display, character displays in superimposed display, SETUP-MENU and other
displays, sets recording formats, sets the formats that can be added to the playlist and sets the time of the internal clock.
Item
FR SUPER
No. DISP.
001 LOCAL ENA
002 CTL DISP
003 REMAIN SEL
005 SUPER
160
Setup: Item Settings
Setting
FR SUPER
No. DISP.
0000 DIS Restricts the number of buttons on the key panel that are available when the REMOTE/
0001 STOP LOCAL switch is set to REMOTE.
0: No buttons are available.
0002 ENA
1: Only the STOP button is available.
2: All buttons are available.
0000 12h Switches the CTL counter display between 12 and 24-hour clock display.
±
0: 12-hour clock display
0001 24h
1: 24-hour clock display
0000 OFF Specifies whether to display the remaining time or total time via superimposed display.
0001 2L 0: No display.
0002 1L 1: The second line shows remaining time and total time of the P2 card.
2: The first line shows remaining time and total time of the P2 card.
0003 P2&SD
3: The first line shows remaining time and total time of a P2 card, the second line shows
remaining time on an SD memory card.
NOTE:
• These functions are not displayed when "2L" is selected and "TIME" is set in setup
menu No. 006 (DISPLAY SEL).
• Total tape time is not displayed when "P2&SD" is selected and "TIME" is set in setup
menu No. 006 (DISPLAY SEL).
• When setup menu No. 041 (LOOP REC) is set to ON, the remaining time is indicated
on the second line when a setting other than OFF is selected.
• The remaining time for P2 cards is not displayed when no P2 card has been inserted.
• The remaining time for SD memory cards is not displayed when an AJ-YCX250G
AVCHD codec board (optional) has not been installed or an SD memory card has not
been inserted.
0000 LCD
59.94Hz
0001 LCD&V
60-25Hz
0002 ALL
Specifies whether superimposed information will be output to VIDEO OUT or SDI OUT.
0: Not output (displayed only on LCD monitor)
1: Output to VIDEO OUT
2: Output to both VIDEO OUT and SDI OUT
NOTE:
• Not displayed when the SUPER switch is set to OFF.
• Only LCD and LCD&V can be set when setup menu No. 25 (SYSTEM FREQ) is set to
something other than 59.94 and 50.
• XX indicates factory default settings.
Settings and brief function description
50Hz 23.98Hz 29.97Hz
only
59-23Hz 25Hz