Connecting This Unit To A Network; Network Settings - Panasonic AJ-HPM200 Operating Instructions Manual

Connecting This Unit to a Network

The network connector (1000Base-T, 100Base-TX, 10Base-T) allows you to connect the unit to a network to transfer clips to
network servers, browse Web sites, launch network services to use them.
(Functions)
• FTP client function enables the unit to send and receive clips
• FTP/Samba server service that permits the unit to operate as a server for loading files
• HTTP server service for viewing thumbnails and metadata on computers and other devices
• Browser function for accessing web sites

Network Settings

Network functions require LAN setup and other settings. Make the settings that your needs require.
◆ NOTE:
• Made network settings are saved.
LAN setup
Use the steps below to make the LAN settings that are
required to connect this unit to a network.
1
Open the thumbnail screen.
2
Press the MENU button.
3
Use the cursor buttons to choose [NETWORK] -
[SETUP] - [LAN] and press the SET button.
126
Connections: Connecting This Unit to a Network
4
The LAN setup screen appears.
Current settings appear.
Use the cursor buttons to select an item and press the SET
button to set it.
5
Press the EXIT button to return to the thumbnail
screen.