Fujitsu fi-4340C Operator's Manual page 93

10. Select Back Density (when "Duplex" was Selected) by pressing
right, /
Screen 8
11. Select Front Halftone by pressing
Parameter
No
H1
H2
L1 (*)
L2 (*)
*) This parameter appears only when the IPC-4D(IMAGE PROCESSING CIRCUIT BOARD) is
installed.
Press to confirm. The scanner displays Screen 9.
Screen 9
12. Select Back Halftone (when "Duplex" was specified) by pressing
same as in step 11. Press
Screen 10
may appear. Then press
or .
Halftone is Off. Therefore binary reading is specified.
Halftone with dither is specified.
Halftone with error diffusion is specified.
Automatic separation with dither is specified.
Automatic separation with error diffusion is specified.
to confirm. The scanner displays Screen 10.
or . As the cursor moves to the
. The scanner displays Screen 8.
Description
or . The parameters are the
G 9-7