Main-
Replace P.head
te-
nance
Repl. maint cart
Head
Printhead L
Info
Printhead R
Clean Platen
Inter-
EOP Timer
face
Setup
TCP/
IPv4
IP
IPv6
iPF6300
Setting Item
IPv4 Mode
Proto-
DHCP
col
BOOTP
RARP
IPv4
IP Address
Set-
Subnet Mask
tings
Default G/W
DNS
DNS Dync up-
Set-
date
tings
Pri. DNS
SrvAddr
Sec. DNS
SrvAddr
DNS Host Name
DNS Domain
Name
IPv6 Support
IPv6 StlessAddrs
DHCPv6
DNS
DNS
State-
Set-
Dync
full
tings
update
Addr
State-
less
Addr
Printer Parts
Description, Instructions
When replacing the Printhead, choose Yes and fol-
low the instructions on the screen. (See "Replacing
the Printhead.")
→P.911
Not displayed during a warning message that the re-
maining Maintenance Cartridge capacity is low.
When replacing the Maintenance Cartridge, choose
Yes and follow the instructions on the screen. (See
"Replacing the Maintenance Cartridge.")
→P.919
Indicates information about the printhead.
Choose Yes to move the Carriage in preparation for
cleaning the Platen.
Specify the timeout period before cancellation of
print jobs that cannot be received by the printer.
Choose whether the printer IP address is configured
automatically or a static IP address is entered man-
ually.
Specify the protocol used to configure the IP address
automatically.
Specify the printer network information when using
a static IP address.
Enter the IP address assigned to the printer, as well
as the network subnet mask and default gateway.
The value that was automatically configured is dis-
played if you have set IPv4 Mode to Automatic.
Specify whether DNS server registration is updated
automatically.
Specify the DNS server address.
Specify the DNS host name.
Specify the DNS domain name.
Specify whether to connect via IPv6.
Specify whether a IPv6 stateless address is used.
Specify whether DHCPv6 settings are used.
Specify whether DNS server registration is updated
automatically.
>
Control Panel
>
8
843
Menu Settings